TAMIYA 15472 1/32 MINI 4WD FRP WIDE FRONT PLATE FOR FULLY COWLED MINI 4WD
Original price was: $4.50.$4.00Current price is: $4.00.
★ This FRP stay can be simlpy applied to any fully-cowled Mini 4WD machine, without the need for any body modifications! Its curved lines were…
TAMIYA 15473 1/32 MINI 4WD ALUMINUM SPACER SET (12/6.7/6/3/1.5mm)
Original price was: $6.00.$4.00Current price is: $4.00.
2.1 x 4 x 1.5mm Spacer x4
2.1 x 4 x 3mm Spacer x4
2.1 x 4 x 6mm Spacer x4
2.1 x 4…
TAMIYA 15475 1/32 MINI 4WD 13MM ROLLER BALL BEARING
Original price was: $9.50.$8.00Current price is: $8.00.
13mm Ball Bearings x2
2x8mm Screws x2
Spacers x4…
TAMIYA 15476 1/32 MINI 4WD BASIC TUNE-UP PARTS SET for MA CHASSIS
Original price was: $15.00.$12.50Current price is: $12.50.
• FRP Wide Front & Rear Stays x1
• Adjustable Mass Damper Weights x4
• 13mm Rollers x6
• Front Stabilizer Head Balls x2
‚Ä¢ Spacers, rollers, spanner and…
TAMIYA 15477 1/32 MINI 4WD HYPER-DASH 3 MOTOR
Original price was: $8.00.$6.00Current price is: $6.00.
Note: (Hyper-Dash 2 motors use copper/carbon mix in the motor brush compound).
Input voltage: 2.4-3.0V
Torque at recommended load: 1.4-1.9mN-m
RPM: 17,200-21,200
Current consumption: 1.6-3.0A…
TAMIYA 15478 1/32 MINI 4WD MASS DAMPER SET w/BALL CONNECTORS (BLOCK WEIGHT)
Original price was: $9.00.$7.50Current price is: $7.50.
The 6x6x32mm block weight provides a lower center of gravity when compared with Item 94976 (hex weight version).
Can be used in conjunction with other separately…
Tamiya 15480 1/32 Mini 4WD Neo-Tridagger ZMC Clear Body Set (Polycarbonate)
$10.00
★This Neo Tridagger ZMC clear body will contribute to a lighter-weight car, and a lower center of gravity. ★It is made from polycarbonate material, which…
TAMIYA 15484 1/32 MINI 4WD TORQUE TUNED 2 MOTOR
Original price was: $6.50.$5.50Current price is: $5.50.
This motor sits right below a light dash as far as performance. Sometimes if you???re lucky you???ll get a high revving one that will blow…
TAMIYA 15487 1/32 MINI 4WD TORQUE-TUNED 2 MOTOR PRO
Original price was: $6.50.$5.50Current price is: $5.50.
High-torque motor features excellent acceleration and holds speed well on both curve and slope sections.
Features an orange end bell.
Input voltage: 2.4-3.0V
Torque at recommended load: 1.7-2.1mN-m
RPM:…
TAMIYA 15489 1/32 MINI 4WD ATOMIC-TUNED 2 MOTOR PRO
Original price was: $6.50.$5.50Current price is: $5.50.
Balance of torque and top speed makes this motor suited to use on tracks combining numerous straights and curves.
Features a black end bell.
Input voltage: 2.4-3.0V
Torque…
TAMIYA 15490 1/32 MINI 4WD SIDE MASS DAMPER SET (for MA CHASSIS)
Original price was: $10.50.$9.00Current price is: $9.00.
New FRP Side Plate x2
6x6x32mm Block Weight x2
2x20mm Screw & Stabilizer Ball Cap x4
Compatible with MA Chassis cars.
Stabilizer ball caps are molded in yellow. It…
TAMIYA 15492 1/32 MINI 4WD BRAKE SPONGE SET (1/2/3mm WHITE)
Original price was: $7.50.$6.50Current price is: $6.50.
3mm & 1mm thickness 50x50mm Brake Sponge Sheet x2 each
2mm thickness 100x50mm Brake Sponge Sheet x1
Fine texture for less slowing from dust on track.
Different thicknesses…
