TAMIYA 18102 1/32 Mini 4WD LUPINE RACER 2 (AR Chassis)
This Mini 4WD kit depicts the Lupine Racer 2, which is a follow up to the original Lupine racer as seen in item 18085. Like the original, the racing wolf character has just a hint of the bad guy in its smile! The body sits on top of the AR chassis for super quick speed runs around the racetrack!
AR CHASSIS
The AR chassis is designed to offer its driver durability, customizability, and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. The air intakes on the chassis and body are integrated for optimal performance. This high-speed racing chassis also features low-friction plastic bearings to ensure that any loss of power from the engine to the wheels is minimal in nature. The under-panel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections and keep the racer on the track where it belongs. Features a 4.2:1 gear ratio.
TAMIYA 18103 1/32 MINI 4WD CROSS SPEAR 01 (VZ)
The Cross Spear 01 was designed by Takayuki Yamazaki, who also penned the DCR models among other Mini 4WD designs. Its body features eye-catching truss sections extending from front to rear, plus a canopy molded in tinted plastic. The VZ chassis is a compact base for the model, and comes in gray plastic with white A parts, accented by green spiral spoke wheels with small diameter, low-profile super hard tires.
VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. This chassis features a gear ratio of 3.5:1.
TAMIYA 18104 1/32 MINI 4WD CROSS SPEAR 02 (VZ)
This assembly kit creates a stylish Mini 4WD car known as the Cross Spear 02, a close relation to our earlier Cross Spear 01 . The one-of-a-kind compact, lightweight design with a smooth, lowdown look, its cockpit shifted forward, and side trellis sections is the brainchild of Japanese designer Takayuki Yamazaki. It is based upon the compact race-focussed VZ chassis, with red Y-spoke wheels and super hard small diameter low-profile tires that minimize bounce after jumps.
VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. This chassis features a gear ratio of 3.5:1.
TAMIYA 18105 1/32 MINI 4WD The GRASSHOPPER Jr. (VZ CHASSIS)
Tamiya 18626 1/32 Mini 4WD Avante Mk.III Azure (MS Chassis)
TAMIYA 18628 1/32 MINI 4WD DASH 2 BURNING SUN (MS Chassis)
This assembly kit will give you lots of fun racing this high performance Mini 4WD PRO machine. The centrally located double shaft motor effectively transmits power to all four wheels for optimum performance. The "One-Touch" three piece chassis requires no glue and is a breeze to assemble. You will enjoy the speed of this machine and its wide choice of settings. The robust form of Tankuro's favored machine the Dash-2 Burning Sun is still popular with fans today. The powerful armored style of this car has been arranged on the equally impressive MS Chassis. Pin spike tires and an N-02 nose unit are employed. Also, as seen in the comic magazine, the front bumper bar is included for display use.
TAMIYA 18629 1/32 MINI 4WD TRIDAGGER XX
Ryo Takaba's Powerful Machine
This assembly kit Mini 4WD Pro is one machine that you will love racing. The centrally located double shaft motor effectively transmits power to all four wheels for optimum performance. The three piece MS chassis requires no glue and is easy to assemble. You can enjoy and quickly customize your machine's set up. The boxy front fender and the uniquely shaped rear wing, accurately capture Ryo Takaba's Tridagger's powerful form as seen in the "Bakuso Kyodai Let's & Go" comic magazine. Along with the N-02 Nose Unit, red colored three spoke wheels with small diameter tires are equipped on this awesome machine.
TAMIYA 18631 1/32 MINI 4WD SPIN-AXE MK.II (MS CHASSIS)
Tamiya 18632 1/32 Mini 4WD Dash-01 Super Emperor (MS Chassis)
Tamiya 18634 1/32 Mini 4WD ASTRALSTER (MS CHASSIS)
The Astralster's body was designed first to evoke a real car, and then adapted to Mini 4WD use. Happily, this means that it retains a road car's appearance without straying from the low-to-the-track, powerful Mini 4WD design. In a first among Mini 4WD vehicles, it features a body with a special matte-finished surface, and also has reflective windows and lights for a high-class look that will wow the competition!
MS Chassis
The MS Chassis has its double-shaft motor and batteries mounted at the center of the chassis for optimum weight distribution and superb stability at high speeds. The nose, center, and tail units are designed for easy attachment/detachment, allowing quick setting adjustments.
※Model may vary from CG illustration.
