TAMIYA 18710 1/32 MINI 4WD STARTER PACK FM-A BALANCED SPEC (ROWDY BULL)
Original price was: $40.00.$33.00Current price is: $33.00.
Balance is the Key
This convenient Starter Pack includes the Rowdy Bull assembly kit together with a set of basic Grade-Up parts designed to give the model a balanced setup. Included are an Atomic-Tuned 2 motor, super hard tires (black), brake set, short mass damper blocks and FRP front/rear plates. Assembly requires minimal small parts for a fuss-free job. The strapping Rowdy Bull body is molded in tinted smoke color ABS resin, while a black chassis parts is combined with grey A parts. Includes 3.5:1 gears, wrench and rubber tubing.
Aerodynamic Front Motor Chassis
The FM-A chassis is a front motor unit with advanced aerodynamic themes that – thanks to its center of gravity toward the front – is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with a low-friction front skid bar, while the chassis underside allows easy access to the motor and quick setup changes. Silver color fin-spoke wheels are included.
| Weight | 0.194 kg |
|---|---|
| Dimensions | 23 × 14 × 6 cm |
Out of stock
Specifications
★Length: 158mm ★Width: 104mm ★Height: 43mm ★Includes Atomic-Tuned 2 motor ★Easy snap-together assembly
Separately Required Items
★R6/AA/UM3 batteries (x2)
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Tamiya 18720 Mini 4WD K4 TASCHE (FM-A Chassis)
This Mini 4WD racing model captures a vintage customized small truck. The model gives a playful image and is sure to catch everyone’s attention at the track with its unique form.
Aerodynamic Front Motor Chassis
The FM-A chassis is a front motor unit with advanced aerodynamic themes that - thanks to its center of gravity toward the front - is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with low-friction front skid bar and roller (4 included) parts, while rear rollers are 8mm thick for superb stability. The chassis underside allows easy access to the motor and quick setup changes. Includes 3.5:1 gear and a motor.
Tamiya 95163 1/32 Mini 4WD K4 Gambol Silver Metallic Body (FM-A Chassis)
The FM-A chassis is a front motor unit with advanced aerodynamic themes that – thanks to its center of gravity toward the front – is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with a low-friction front skid bar, while the chassis underside allows easy access to the motor and quick setup changes. Aircraft-inspired aero side stays allow attachment of a range of Grade-Up parts. The chassis is molded in durable ABS, with low friction A parts such as underpanel. The model includes a motor and 3.5:1 gears.
Tamiya 95589 1/32 Copper Fang Black Special (FM-A Chassis)
The chassis adopted FM-A with front motor layout incorporating aero design. Since the center of gravity is closer to the front of the car body, it is possible to run with a sense of stability even on courses with many ups and downs. The four rollers are also made of low friction resin, including a skid bar made of low friction resin at the bottom of the front as standard equipment. In particular, the rear roller is an 8mm thick type with improved stability. In addition, the motor can be easily replaced from the bottom of the chassis, and setting changes can be made quickly. Various parts can be attached to the aero side stay, which is inspired by the cross-sectional shape of the wing of an airplane. The chassis body made of polycarbonate ABS resin is black, and the A parts made of low friction resin are fluorescent green. The gear ratio is set to 4.2: 1.
