Showing 37–48 of 70 results

Show sidebar
Show 9 12 18 24
Clear filters
-16%
Compare

Tamiya 15498 CARBON WIDE FRONT PLATE 1.5mm

Original price was: $15.50.Current price is: $13.00.

Carbon Wide Front Plate x1
Attachment holes for 9, 11, 13, and 19mm rollers.
Compatible with MA, MS, AR, VS, Super-II and Super XX chassis machines.

Add to wishlist
Add to cart
Quick view
-18%
Compare

Tamiya 15499 1/32 Mini 4WD HG Carbon Wide Rear Plate 1.5mm

Original price was: $16.50.Current price is: $13.50.

Carbon Wide Rear Plate x1
Attachment holes for 9, 11, 13, 17 and 19mm rollers.
Compatible with MA, MS, AR, VS, Super-II, Super XX and Super TZ-X chassis cars.

Add to wishlist
Add to cart
Quick view
-31%
Compare

TAMIYA 15501 1/32 MINI 4WD SLIMLINE MASS DAMPER SET

Original price was: $8.00.Current price is: $5.50.

This set includes 2 each of 2 different lengths of 7mm diameter mass damper, which measure 5.5mm (1.5g) and 11.5mm (3g) respectively.

Add to wishlist
Add to cart
Quick view
-25%
Compare

Tamiya 15510 1/32 Mini 4WD JR Countersunk Screw Set – Stainless Steel aww

Original price was: $6.00.Current price is: $4.50.
  • 10mm Countersunk Screw x4
  • 12mm Countersunk Screw x6
  • 20mm Countersunk Screw x2
  • 25mm Countersunk Screw x4
  • 30mm Countersunk Screw x4
  • Can be used as replacements for countersunk screws in limited edition VS & Super XX Evo.1 chassis.
  • Easily countersink parts with item 74130 electric Router Countersink Bit (For 2mm Screws)
Add to wishlist
Add to cart
Quick view
-13%
Compare

Tamiya 15512 1/32 Mini 4WD Brake Sponge Set Mild

Original price was: $7.50.Current price is: $6.50.

• 3mm thickness 50x50mm Brake Sponge Sheet x2
• 2mm thickness 100x50mm Brake Sponge Sheet x1
• 1mm thickness 50x50mm Brake Sponge Sheet x2

Add to wishlist
Add to cart
Quick view
-15%
Compare

TAMIYA 15518 1/32 MINI 4WD FRP REAR BRAKE STAY SET (WHITE)

Original price was: $6.50.Current price is: $5.50.

• FRP Rear Stay x1
• 2mm Brake Sponge (Red, 100mm x 50mm) x1
• Rigid FRP stay has a wide range of holes to allow attachment of mass dampers and other Grade-Up parts.
• Compatible with MA, MS, AR, VS, Super-II, Super X, Super XX and Super TZ-X chassis cars.

Add to wishlist
Add to cart
Quick view
-21%
Compare

TAMIYA 15519 1/32 MINI 4WD HG ROUND HOLE BALL BEARINGS (4PCS.)

Original price was: $24.00.Current price is: $19.00.

• HG 620 Ball Bearings x4
• Thickness: 2.5mm.

Add to wishlist
Add to cart
Quick view
-18%
Compare

Tamiya 15524 FRP Wide Front Plate (VZ Chassis)

Original price was: $5.50.Current price is: $4.50.

FRP Wide Front Plate x 1
Features holes to enable installation of 9mm, 11mm, 13mm, 17mm and 19mm rollers on the VZ chassis in wide positions just inside the standard Mini 4WD race regulations.

Add to wishlist
Add to cart
Quick view
-17%
Compare

TAMIYA 15526 1/32 MINI 4WD BASIC TUNE-UP PARTS SET for VZ CHASSIS

Original price was: $15.00.Current price is: $12.50.

• FRP Wide Front Plate (for VZ Chassis) x2 – these lightweight FRP plates are for use front and rear, and allow attachment of 9mm, 13mm and 19mm rollers.
• Adjustable Mass Damper Weights (2.5g) x4 – choose how many of these weights to use in adjusting the lightweight VZ chassis setup.
• 13mm Low-Friction Rollers – these plastic parts will provide slick rotation for minimal speed loss.
• Includes stabilizer ball caps, screws and other parts for attachment of the components in this set.
• Compatible with VZ chassis cars.

Add to wishlist
Add to cart
Quick view
-20%
Compare

TAMIYA 15527 1/32 MINI 4WD STAINLESS STEEL COUNTERSUNK SCREW SET (6/8/15mm)

Original price was: $5.00.Current price is: $4.00.

★With the correct holes, countersunk screws sit flush to the surface they are attached on, for less chance of catching on the track surface, etc. and causing damage or loss of speed.

★This set includes ten each of 6mm, 8mm and 15mm screws crafted in stainless steel.

Add to wishlist
Add to cart
Quick view
-25%
Compare

TAMIYA 15528 1/32 MINI 4WD HI-MOUNT TUBE STABILIZER SET (BLACK)

Original price was: $4.00.Current price is: $3.00.

Tube Stabilizers x3
• Stabilizers are for attachment to front rollers, and help balance the car if it loses shape during a corner.
• Stabilizer dimensions: 8mm diameter, 10mm in height.
• Parts are molded in Black ABS.
• Small parts for attachment included.
• Compatible with Mini 4WD & Mini 4WD PRO cars.

Add to wishlist
Add to cart
Quick view
-14%
Compare

TAMIYA 15532 1/32 MINI 4WD LOW FRICTION PLASTIC DOUBLE ROLLERS (black/19-19mm) black

Original price was: $7.00.Current price is: $6.00.

About the Model
★Expand your rear roller setup options with these parts, which have upper and lower rollers both 19mm in diameter.
★The top roller acts on the course fence to help your car retain shape when it loses balance.
★Rollers are molded in low friction POM plastic, and on account of their large diameter, are able to deal with bigger bumps in the course fence.
★Separately sold 520 ball bearing washers can be used for a further upgrade.
★The image at right shows this product fitted to Item 18658 Chevalier (MA), along with other separately sold Grade-Up parts.

Add to wishlist
Add to cart
Quick view