Showing 25–36 of 435 results

Tamiya 15193 1/32 Mini 4WD FRP Reinforcing Plate Set

Original price was: $3.50.Current price is: $3.00.

★These reinforcing plates are crafted in FRP. Length: 91mm, thickness: 7mm. ★Multiple attachment holes are incorporated into the design. ★Some

Tamiya 15232 – Mini 4WD Screw Set A

$3.00

[vc_row][vc_column][vc_column_text]‚òÖ This set of screws can be put to a number of uses on your Mini 4WD car – raising

-25% Sold out

TAMIYA 15236 1/32 MINI4WD HIGH SPEED COUNTER GEAR SET

Original price was: $6.00.Current price is: $4.50.

Compatible Cars
Type 2, Type 4, Type 5, Zero, FM, FM-A, Super-1, Super-II, Super FM, Super TZ, Super X, Super XX, Super TZ-X, VS & AR Chassis cars

Sold out

Tamiya 15238 1/32 Narrow One-Way Wheel Set for Super X Chassis

$12.00

★One-way design small diameter wheels give smooth cornering.
★Grippy Reston sponge tires and spacers are also included.

Sold out

Tamiya 15287 1/32 Mini 4WD Hex Hole Ball Bearing Set (4pcs.)

$16.00

[vc_row][vc_column][vc_column_text]Used on Mini 4WD car axles, these ball bearings provide smooth rotation for more efficient power and greater top speeds.

Sold out

Tamiya 15289 8T Metal & Plastic Pinion Gear Set (4pcs. each)

$6.00

[vc_row][vc_column][vc_column_text]‚òÖChange your pinion gears as they wear, to ensure that your Mini 4WD car performs to its potential. ‚òÖThis set

TAMIYA 15297 1/32 MINI 4WD 72mm HOLLOW STAINLESS STEEL SHAFTS

Original price was: $4.00.Current price is: $3.00.

Compatible Cars
Super X & Super XX Chassis cars

Tamiya 15317 R/C MINI 4WD POWER-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

Basic specifications: Appropriate voltage: 2.4 to 3.0V Recommended load torque: 1.5 to 2.0mN ・ m Rotation speed: 19900 to 23600r / min Current consumption: 2.5 to 3.3A

Tamiya 15318 1/32 Mini 4WD Sprint-Dash Motor

Original price was: $7.00.Current price is: $6.00.
  • Voltage(V)‚ 2.4-3.0
  • Torque (nM-m)‚ 1.3-1.8
  • RPM(r/min)‚ 20700-27200
  • Current (A)‚ 2.8-3.8
-29% Sold out

Tamiya 15340 1/32 Mini 4WD Motor Cooling Shield

Original price was: $7.00.Current price is: $5.00.

This is an aluminum motor heat sink that can be attached to the Dangun Racer EVO series with one touch and improves the heat dissipation effect of the motor. It increases the area that the motor comes into contact with the air, effectively dissipating heat, not only preventing the power loss of the motor due to heat, but also extending the life of the motor.

TAMIYA 15343 1/32 MINI 4WD MULTI CHASSIS BALANCE WEIGHT

Original price was: $5.50.Current price is: $5.00.

[vc_row][vc_column][vc_column_text]‚òÖThese die-cast metal weights will be useful in fine-tuning the balance of your car. ‚òÖContains four different weights, across fourteen