Adafruit DotStar LED Strip - Warm White - 144 LED/m ~3000K - One Meter Category_Instruments/RF Analyzers animatronics) based on BASIC Stamp

animatronics) based on BASIC Stamp or Arduino platforms

This low-cost Prop Shield is meant for making light and sound effects on small handheld props and wearable costumes

high bandwidth IO

Check the _Recommended Products_ section below for the type of headers we use in the Hookup Guide

but you may need to re-terminate them

Adafruit DotStar LED Strip - Warm White - 144 LED/m ~3000K - One Meter Category_Instruments/RF Analyzers animatronics) based on BASIC StampMove over NeoPixels, there's a new LED strip in town! These fancy new DotStar LED strips are a great upgrade for people who have loved and used NeoPixel strips for a few years but want something even better. DotStar LEDs use generic 2 wire SPI, so you can push data much faster than with the NeoPixel 800 KHz protocol and there's no specific timing required. They also have much higher PWM refresh rates, so you can do Persistence of Vision (POV) and have