POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
TAMIYA 15456 1/32 MINI 4WD SETTING GEAR SET (for AR CHASSIS)
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
TAMIYA 15400 1/32 MINI 4WD FLUORINE COATED GEAR SHAFT (RIBBED, 2PCS.)
TAMIYA 15186 1/32 MINI 4WD PLASMA-DASH MOTOR
TAMIYA 18639 1/32 MINI 4WD ABILISTA (MA CHASSIS)
Looks Like a Winner!
The Abilista is the fifth model to appear on the midship motor layout MA Chassis. Just one glance at the alluring super sports car-inspired body will be enough to convince you that this is a must-have model, with the stylish long nose short-deck form accentuated by sumptuous curves. Bulging front and rear fenders accentuate the slimline center of the car nicely, while an eye-catching wing not only gives a sporty look, it also has air outlets that combine with the front intake to boost the model's aerodynamics. The color scheme is an understated yet effective white with blue tones and gold trim, with metallic stickers included to recreate headlights, windows and taillights. The model rolls on white dish-type wheels with low-profile tires.
3PV Transmitter – 3(+1)-Channel Digital Proportional RC System
TRANSMITTER SPECS
T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 3+1* CHANNELS
*The 4th channel is used for mixing functions only.
COMMUNICATION METHOD:
Two-way (T-FHSS)/One-way(S-FHSS, FHSS) operation system.
MAXIMUM OPERATING RANGE:
80m (Optimum condition)
FOR SAFETY:
F/S, ID
TRANSMITTER FREQUENCY:
2.4 GHz band
POWER REQUIREMENT:
Size AA Dry Cell battery x 4 (6 V)
CURRENT DRAIN:
100 mA or less
TRANSMISSION ANTENNA:
1/2λ di-pole (Built-in)
RECEIVER SPECS
R304SB
T-FHSS
SIZE:
35.1 mm x 23.2 mm x 8.5 mm
WEIGHT:
6.6 g
OPERATING VOLTAGE:
DC 4.8V-7.4V
R203GF
S-FHSS/FHSS (Auto Detection)
SIZE:
39 mm x 26 mm x 10 mm
1.54 in x 1.02 in x 0.39 in
WEIGHT:
8 g
0.28 oz
OPERATING VOLTAGE:
DC 4.8V-7.4V
Tamiya 94753 1/32 Mini 4WD Aluminum Spacer Set
BEYBLADE X
GEAR SPORTS
TAMIYA 95693 1/32 MINI 4WD HG CARBON REAR BUMPER PLATE (1.5MM)
Zippo Lighter Fluid 125ml
TAMIYA 15369 1/32 MINI 4WD AVANTE MK.II CLEAR BODY SET MA & MS CHASSIS CARS
TAMIYA 92459 – TAMIYA X IAB STUDIO COMETS (MA CHASSIS)
Tamiya 15432 SS Gear (SuperXX & SuperII)
Tomica Premium 934325 – Unlimited Mini 4WD Vanguard Sonic (Tomica)
'- Introducing Bakusou Kyodai Let's & Go!! Mini 4WD Vanguard Sonic in Tomica Premium Unlimited!
- [Tomica Premium Unlimited] is a Tomica series that reproduces cars that have appeared in various scenes such as movies, TV dramas, and comics, and whose charming roles are vividly remembered, to the maximum extent possible with detailed modeling and painting.
- This is the "Tomica that adults can get excited about" series, which has infinite possibilities and can be enjoyed not only by adults who used to play with Tomica, but also by fans of the series.
- Product contents: Tomica Premium Unlimited main unit (1)
(C) TOMY
(C)TAMIYA
(C)こしたてつひろ/小学館・ShoPro
TAMIYA 1/32 MINI 4WD 18101 SUPER AVANTE JR. (VZ CHASSIS)
Tamiya announced the release of the Super Avante Jr. which is paired with the VZ chassis and has a body designed by Japanese designer Kota Nezu of znug design, who designed our recently-released R/C Super Avante body (Item 58696). This Mini 4WD model renders the Super Avante’s streamlined design in smaller scale with distinctive, small-type front fenders!
YT-004-1 YUTORI RACING 620 BALL BEARING SET (2 PIECES)
TAMIYA 15527 1/32 MINI 4WD STAINLESS STEEL COUNTERSUNK SCREW SET (6/8/15mm)
TAMIYA 95786 1/32 MINI 4WD PORTABLE PIT PURPLE (ASIA CHALLENGE 2026)
To commemorate the Tamiya Mini 4WD Asia Challenge 2026 (TMAC), this limited-edition Mini 4WD Portable Pit includes two commemorative stickers!
The carrying case is designed specifically with Mini 4WD users in mind and can be used to hold everything including tools, batteries, parts, and the machines themselves. It is a convenient item for keeping all your Mini 4WD items in one place.
Tamiya 95123 HG Carbon Reinforcing Plate for 13/19mm Roller (1.5mm) J-Cup 2019
• 2mm Thick Carbon Fiber Plates x2
• Plates feature printed Tamiya logo.
• Carbon fiber material provides excellent durability and strength.
• Features stylish carbon fiber surface pattern, and J-Cup/Tamiya print in Gold.
• Can be used with 13mm or 19mm rollers, providing set-up options.
• Screws and washers included.
324 OBJECT WHEEL INSTALLER
TAMIYA 92470 1/32 MINI 4WD AVANTE MK.III NERO TAMIYA KOREA MINI 4WD CUP 2026 (MS CHASSIS)
This is the Tamiya Korea Mini 4wd Cup 2026 Edition
• Mini 4WD model assembly kit. Length: 155mm, width: 104mm, height: 42mm.
• Avante body is molded in Translucent Pink ABS plastic.
• The MS chassis is molded in white ABS plastic, and the A Parts are molded in black ABS plastic.
• The model features a 3.7:1 gear ratio.
• Includes stickers to decorate the car.
• White drum-type wheels are paired with maroon low friction low profile tires.
• Two AA batteries are required (sold separately).