POPULAR CATEGORIES

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

TAMIYA MINI4WD

Let's Get Back On Track!

1.

Free Delivery.

Free - $150 and above

2.

Order As a Gift.

Surprise your loved ones.

3.

High Quality.

100% Authentic premium quality toys.

4.

Compete.

Engage in friendly competition.

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

Sold out

Tamiya 95588 1/32 Dog Kuroshiba Special (VS Chassis)

$25.00

The popular mini 4WD dog is now available in a special kit as Kuroshiba. The body adopts the first yellow color Mach buret, and the driver figure of Kuroshiba to put on the driver’s seat is already assembled and painted. A cute marking sticker is also included. The pastel blue color chassis is a small and lightweight VS with a short wheelbase. A large diameter low-height tire with white print is attached to the large diameter 6-spoke wheel of fluorescent orange. It is a kit that can be easily assembled by fitting and screwing without using adhesive.

-8% Sold out

BEYBLADE X CX-08 FULL SET

Original price was: $130.00.Current price is: $120.00.

What's Included:
Each individual set will contain all of the 6 following Beyblades.

NOTES:

CX-08 01: CerberusFlame W5-80WB (Prize) x1
CX-08 02: WhaleFlame M3-85HT (Prize) x1
CX-08 03: CerberusDark W1-60F x1
CX-08 04: DranBuster 5-80MN x1
CX-08 05: BlackShell 7-70WB x1
CX-08 06: CobaltDragoon 4-55WB x1

Completely sealed. Never opened.

INFO:

Ages: 8+

Compatibility: Beyblade X
Condition: NIP (New In Packaging)
Brand: Takara Tomy

-10% Sold out

Beyblade X BX-26 Booster Unicorn Sting 5-60GP

Original price was: $14.95.Current price is: $13.45.

WHAT'S IN THE BOX:

  • Blade: Unicorn Sting
  • Ratchet: 5-60
  • Bit: GP
  • Premier Stickers
  • Documentation (Japanese)

ABOUT BX-26 Unicorn Sting 5-60GP

  • Manufacturer: Takara Tomy
  • Product Code: BX-26 / BX26
  • System: Xtreme Gear Sports
  • Series: Beyblade X
-13% Sold out

TAMIYA 15529 1/32 MINI 4WD LOW FRICTION PLASTIC DOUBLE ROLLERS (BLACK/13-13mm)

Original price was: $4.00.Current price is: $3.50.

★ These simple dual rollers are 13mm top and bottom, and recommended for use on the rear of the car. They support the car if it leans, rolling on the lane wall.
★ They are molded in low-friction material, and can be used in conjunction with separately sold 520 ball bearings, or bearing roller spacers, for a further performance boost.
★ Small parts plus a wrench for attachment included.

Compatible Cars
MA, VZ & AR Chassis cars

Sold out

Tamiya 85006 TS-6 MATT BLACK

$9.50

Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.

* The colors shown are Web Approximate color for display. It may differ from the actual paint color.

-20% Sold out

TAMIYA 18650 1/32 MINI 4WD DCR-02 (MA CHASSIS)

Original price was: $20.00.Current price is: $16.00.

Deeply Cool Racer
This assembly kit creates a thrilling Mini 4WD racer called the DCR-02. Its stylish yellow ABS body is the work of Takayuki Yamazaki, who also designed the DCR-01, the first model in the DCR series. The DCR-02 body is comprised of three separate components - front cowl, rear cowl and rear wing - which can be mixed and matched with other DCR-02 bodies, and the front and rear cowls can also be used with DCR-01 components! Metallic stickers are included in the kit to decorate the body. The MA chassis is molded in gun metal color, with yellow A parts , plus Y-spoke wheels and stylish low-profile tires.

-16% Sold out

TAMIYA 15251 1/32 Mini 4WD 19mm Aluminum Roller w/Plastic Ring

Original price was: $12.50.Current price is: $10.50.

★These lightweight and rigid aluminum rollers have a stylish aero spoke design. ★Built-in ball bearings ensure smooth rotation, and plastic rings help maintain your model’s speed. ★Some bodies may require modification.

-10% Sold out

TAMIYA 18714 1/32 MINI 4WD MACH FRAME (FM-A CHASSIS)

Original price was: $20.00.Current price is: $18.00.

Mach Attack!
This assembly kit creates the Mach Frame, a stylish Mini 4WD racer whose body won the MERIT AWARD in the 2018 Mini 4WD Design Contest held in Japan. An innovative body design is comprised of a body and 3 separate frame components, with themes drawn from high-speed motorcycles and jets. Metallic stickers are included in the kit to decorate the model

OUR BLOG