POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
Beyblade X BX-36 Random Booster Whale Wave Select
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
Tamiya 95511 1/32 Mini 4WD DCR-02 Body Parts Set (Fluorescent Orange)
TAMIYA 95693 1/32 MINI 4WD HG CARBON REAR BUMPER PLATE (1.5MM)
TAMIYA 92436 1/32 MINI 4WD LOW FRICTION TIRE MAROON, 2Pcs GOOD LIFE 50TH ANNIVERSARY
Tamiya 19442 1/32 Mini 4WD Z Wingmagnum Kit (AR Chassis)
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. The air intakes on the chassis and body are integrated for optimal performance. This high-speed racing chassis also features low-friction plastic bearings to ensure that any loss of power from the engine to the wheels is minimal in nature. The under-panel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features a 4.2:1 gear ratio.
TAMIYA 18638 1/32 MINI 4WD TRIGALE (MA CHASSIS)
The fourth release of Mini 4WD PRO, using the MA chassis, which is also popular in Mini 4WD racing, is the Trigale. The form, which is based on the image of a supercar, is characterized by three sharp points that join the tips of the left and right fenders and the nose, just like the name "TRI" which stands for three. The large canopy narrows sharply towards the rear, and conversely, the left and right rear fenders jut out greatly, so three independent shapes can be seen at the rear as well. In addition, the stickers that tighten up the edgy shape are metallic in tone. The nose and cockpit sides have carbon patterns to enhance the racing mood. In addition, the rear wing set lower than the roof asserts that it is a high-speed machine. 26mm low-profile tires are set on silver fin-design wheels.
BEYBLADE X
GEAR SPORTS
TAMIYA 15473 1/32 MINI 4WD ALUMINUM SPACER SET (12/6.7/6/3/1.5mm)
BEYBLADE X BX-48 RANDOM BOOSTER – METAL COAT EDITION – FULL SET
TAMIYA 18636 1/32 MINI 4WD HEAT EDGE (MA CHASSIS)
Mr McKenic Contact Cleaner
TAMIYA 92460 1/32 MINI 4WD COPPERFANG TKC 30TH ANNIVERSARY SPECIAL (FM-A CHASSIS)
TAMIYA 15451 1/32 MINI 4WD FRP WIDE FRONT PLATE (for AR CHASSIS)
FMS Jimny Suzuki RC12002 RTR 1/12 RC Car with 2.4G Two Speed Transmission RC Crawler with LED Lights for RC Model Car
The first in the world to have both the appearance and simulation of the fine interior and chassis structure, and at the same time completely restore the simulation remote control model of the real car.
Car estimated arrival: End July
Package included:
1x RC Car
1x Remote control
1x USB Charger
1x Rechargeable battery
1x Manual
1x Sleeve
1x Bind plug
TAMIYA 18662 1/32 MINI 4WD AVANTE MK.III NERO
This Mini 4WD kit takes the Avante MK. III Nero kit (item 18627) and pairs it with various performance parts including a Light Dash PRO Motor to get racers up to speed with a tuned chassis.
• Mini 4WD model assembly kit. Length: 155mm, width: 104mm, height: 42mm.
• Avante body is molded in Smoke ABS plastic.
• The MS chassis is molded in red ABS plastic, and the A Parts are molded in white ABS plastic.
• Light-Dash motor PRO is included. The model features a 3.7:1 gear ratio.
• Includes metallic stickers to decorate the car.
• Red fin-type wheels are paired with black super hard small diameter low-profile tires.
• Two AA batteries are required (sold separately).
TAMIYA 92435 YELLOW CHASSIS AND A PARTS ONLY
Tamiya 18643 1/32 Mini 4WD Rise Emperor (MA chassis)
[A new emperor finally appears in the new dash machine] This is a plastic model assembly kit of a high-performance racer equipped with a double shaft motor. Hiroyuki Takei's mini 4WD manga "Hyper", which began serialization in the second issue of Shogakukan's "CoroCoro Aniki" Dash! Yonkuro''. The new machine driven by the main character, Yonkuro Hinomaru, is the Rise Emperor. The body design is based on the style of the popular first-generation Dash No. 1 Emperor and has been brushed up by Mr. Takei. The front and sides have been updated. Equipped with a strong frame that covers the body, the large air intake at the top of the canopy, which is a feature of the new dash machine, is also impressive.Details such as the canopy side lights and rear damper unit carried over from the first generation have been paid attention to. The shape is attractive.The chassis is an MA equipped with a double shaft motor that pursues drive efficiency.Slick tires are attached to the white-colored large diameter 4-spoke wheels. [
MA chassis that pursues drive efficiency] What is MA? , Abbreviation for Midship AERO. The "MS Chassis" has a mid-ship layout with a double shaft motor mounted in the center of the vehicle body, and the "AR Chassis" is designed with particular attention to airflow (aero) while driving. The "MA Chassis" combines all of the outstanding features into one chassis.Of course, by making use of the racing know-how accumulated over the years, it is equipped with six low-friction resin rollers and a rear skid bar as standard equipment. Driving performance has also been thoroughly refined.In addition, the use of an integrated monocoque structure further improves ease of assembly and maintenance, making it suitable for everyone from beginners to veteran racers, as well as street corner races held on smaller courses. It is a chassis that can be used in a wide range of applications, from official competitions on large special 5-lane circuits.A gear ratio of 4:1 is set.
Tamiya 95408 1/32 Mini 4WD DCR-01 Body Parts Set (Clear Black)
TAMIYA 92448 1/32 MINI 4WD GEO GLIDER ADPACK TKC (FM-A)
A universal yet easy-to-use Korean-style advanced pack
Geo Glider Advanced Pack TKC Edition is composed of reasonably cost-effective parts that allow for universal and smooth driving in various track environments. This product is designed to help beginners or beginners understand effective parts combination and structure, and to show them the joy of setting up a mini car. We aim to achieve a level of perfection that allows even those who are hesitant to participate in competitions due to vague fears to take on the challenge, and this process includes a more practical-oriented Korean style based on data and know-how gathered from official competitions and various private competitions over a long period of time. This contains efforts to create an advanced pack. This product, which was planned by Tamiya Korea in everything from the machine setting design to the sticker design, attempted a drastic image transformation from the existing Geo Glider kit. It is overflowing with strong charisma, including the strong color contrast of red and black, and stickers designed to imagine the fierce appearance of a bird of prey spreading its wings and flying towards its prey.
[Tune-up parts that can upgrade the machine]
● Hyper Dash 3 Motor FRP Stay (ITEM 15243) FRP Front Wide Stay (ITEM 15472)
● FRP multi-reinforcement plate ⑤ FRP rear brake stay brake sponge (2mm thick, blue/white)
● FRP plate (ITEM 15242) 2mm diameter cap screw (25mm×2/30mm×2)
● 1.4mm hollow propeller shaft and 13mm low-friction plastic roller.
● Super hard low profile tires (black) ● Mass damper set