POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
TAMIYA 15501 1/32 MINI 4WD SLIMLINE MASS DAMPER SET
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
TAMIYA 92446 1/32 MINI 4WD HYUNDAI IONIQ 5N (AR CHASSIS)
This is Tamiya 1/32 Mini 4WD Hyundai IONIQ 5N AR Chassis Kit EP. Hyundai N is Hyundai’s high-performance division, responsible for motorsports and high-performance vehicles. IONIQ 5 N is Hyundai N’s first electric vehicle, providing a total output of 650PS from two motors with an AWD system. As of 2024, it is the fastest electrified SUV recorded at Germany’s Nürburgring Nordschleife. This IONIQ 5 N was created as a mini car through collaboration between Tamiya Korea and Hyundai Motor Company.
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. The air intakes on the chassis and body are integrated for optimal performance. This high-speed racing chassis also features low-friction plastic bearings to ensure that any loss of power from the engine to the wheels is minimal in nature. The underpanel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features a 3.5:1 gear ratio.
Tamiya 95454 1/32 Mini 4WD HG Lightweight Aluminum Ball-Race Roller (19mm Ringless/Gun Metal)
BEYBLADE X
GEAR SPORTS
Tamiya 19442 1/32 Mini 4WD Z Wingmagnum Kit (AR Chassis)
TAMIYA 18100 1/32 MINI 4WD ELEGLITTER (VZ CHASSIS)
TAMIYA 15548 1/32 MINI 4WD HG CARBON WIDE FRONT PLATE 2MM (SLIDING DAMPER)
Tamiya 86012 PS-12 SILVER
$14.00TAMIYA 19454 1/32 MINI 4WD COSMOSONIC (FM-A CHASSIS)
TAMIYA 15545 1/32 MINI 4WD HARD SMALL DIA. LOW-PROFILE TIRES (26mm/GRAY) & CARBON WHEELS (DISH, for SUPER X & XX CHASSIS)
This handy set includes four each of dish design carbon fiber reinforced wheels and hard small diameter low-profile tires. Carbon fiber wheels are highly durable and reduce bounce, while the tires are harder than standard ones, lowering their grip and helping your car maintain corner speed. Black wheels and gray tires make for a realistic look.
TAMIYA 15532 1/32 MINI 4WD LOW FRICTION PLASTIC DOUBLE ROLLERS (black/19-19mm) black
About the Model
★Expand your rear roller setup options with these parts, which have upper and lower rollers both 19mm in diameter.
★The top roller acts on the course fence to help your car retain shape when it loses balance.
★Rollers are molded in low friction POM plastic, and on account of their large diameter, are able to deal with bigger bumps in the course fence.
★Separately sold 520 ball bearing washers can be used for a further upgrade.
★The image at right shows this product fitted to Item 18658 Chevalier (MA), along with other separately sold Grade-Up parts.
TAMIYA 18646 1/32 MINI 4WD DCR-01 (MA CHASSIS)
[PRE ORDER] TAMIYA 92464 1/32 MINI 4WD HONG KONG RACING TAXI (GREEN SPECIAL) (FM-A CHASSIS)
Ever since its release years ago, the Mini 4WD model kit “Hong Kong Racing Taxi” – a highly detailed model that authentically captures the look and feel of Hong Kong’s iconic red taxis – has been beloved by local and also global fans. Now, Tamiya Hong Kong proudly introduces a new addition to the lineup: the Hong Kong Racing Taxi (Green Special)!
The Green Special Version faithfully reproduces the New Territories Taxi, known locally as the “green cab,” which has served the New Territories region since 1976. As a Mini 4WD, this model stands out with its rare fluorescent yellow chassis and matching fluorescent yellow tires printed with “TAMIYA MINI 4WD” and “WAIGO HOBBY.” The A parts are molded in green to perfectly match the taxi’s signature color theme, making it a true head-turner on the racetrack!
Item 92464 1/32 Mini 4WD Hong Kong Taxi (Green Special) (FM-A Chassis) Assembly Kit Version includes a special motor, first released in Hong Kong! The included Torque-Tuned 2 motor features the Lion Rock emblem representing Hong Kong alongside the Tamiya and Waigo Hobby logos, enabling this Hong Kong taxi to race at full speed, embodying the Lion Rock spirit!
TAMIYA 95425 1/32 MINI 4WD AVANTE MK.III RED SPECIAL (MS CHASSIS)
This is a re-issue of the classic Red Special version of the Avante Mk.III. As the name suggests, the Avante Mk.III appears in a mainly red theme, with special stickers. The model is based upon the midship motor MS chassis, which has detachable N-02 nose and T-01 tail units, and offers superlative stability and optimum weight distribution.
Tamiya 18643 1/32 Mini 4WD Rise Emperor (MA chassis)
[A new emperor finally appears in the new dash machine] This is a plastic model assembly kit of a high-performance racer equipped with a double shaft motor. Hiroyuki Takei's mini 4WD manga "Hyper", which began serialization in the second issue of Shogakukan's "CoroCoro Aniki" Dash! Yonkuro''. The new machine driven by the main character, Yonkuro Hinomaru, is the Rise Emperor. The body design is based on the style of the popular first-generation Dash No. 1 Emperor and has been brushed up by Mr. Takei. The front and sides have been updated. Equipped with a strong frame that covers the body, the large air intake at the top of the canopy, which is a feature of the new dash machine, is also impressive.Details such as the canopy side lights and rear damper unit carried over from the first generation have been paid attention to. The shape is attractive.The chassis is an MA equipped with a double shaft motor that pursues drive efficiency.Slick tires are attached to the white-colored large diameter 4-spoke wheels. [
MA chassis that pursues drive efficiency] What is MA? , Abbreviation for Midship AERO. The "MS Chassis" has a mid-ship layout with a double shaft motor mounted in the center of the vehicle body, and the "AR Chassis" is designed with particular attention to airflow (aero) while driving. The "MA Chassis" combines all of the outstanding features into one chassis.Of course, by making use of the racing know-how accumulated over the years, it is equipped with six low-friction resin rollers and a rear skid bar as standard equipment. Driving performance has also been thoroughly refined.In addition, the use of an integrated monocoque structure further improves ease of assembly and maintenance, making it suitable for everyone from beginners to veteran racers, as well as street corner races held on smaller courses. It is a chassis that can be used in a wide range of applications, from official competitions on large special 5-lane circuits.A gear ratio of 4:1 is set.