POPULAR CATEGORIES

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

TAMIYA MINI4WD

Let's Get Back On Track!

1.

Free Delivery.

Free - $150 and above

2.

Order As a Gift.

Surprise your loved ones.

3.

High Quality.

100% Authentic premium quality toys.

4.

Compete.

Engage in friendly competition.

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

-15% Sold out

TAMIYA 95680 1/32 MINI 4WD HG ALUMINUM WHEELS for SMALL DIA. NARROW TIRES (24mm) (REVERSIBLE, 2PCS.)

Original price was: $13.00.Current price is: $11.00.

These high quality aluminum wheels are for use with small-diameter (24mm) tires: heavier than plastic wheels, they contribute to a lower center of gravity and enhanced stability. They can be fitted to only one end of the car to fine-tune its balance, or even reversed to allow use with Super X and Super XX chassis cars.

★Four bushings are also included.

Sold out

MINI 4WD 3 LANE JUNIOR CIRCUIT

$360.00

Assembled Course Dimensions: 306cm by 144cm
Course Length: 3 laps = approximately 20m

Sold out

Tamiya 95137 HG 19mm Aluminum Ball-Race Rollers J-Cup 2020 (2pcs.)

$20.00

• 19mm Aluminum Ball-Race Rollers x2
• Screws for attachment included.

TAMIYA 69571 1/32 MINI 4WD BANK APPROACH 20 RED

Original price was: $155.00.Current price is: $127.00.

• Bank Approach Section (Black) x2
• Curve Section Support (Black) x1
• Pipes, metal parts, etc. included.
• Can be used with Mini 4WD Japan Cup Junior Circuit

-16% Sold out

TAMIYA 92443 1/32 MINI4WD Line Friends Brown Racer (FM-A)

Original price was: $45.00.Current price is: $38.00.

Birth of Line Friends Brown Racer full of fresh and lively energy

The mini 4-wheel drive Line Friends Brown Racer is based on the 'K4 Gamble', a custom light truck that is gaining popularity overseas as a motif, and is a specially planned mini car of Tamiya Korea that was created through collaboration with Line Friends under an official license agreement. . In the driver's seat, the cute Brown from Line Friends rides as the driver. The Line Friends Brown Racer, which consists of a clear blue body decorated with fresh Line Friends exclusive design stickers, white A-parts, and a newly released fluorescent pink chassis, is full of fresh and lively atmosphere when completed. In addition to the cute and fresh design, we also prepared basic parts with the actual race in mind. The lightweight yet durable dish-type carbon-reinforced wheels are equipped with fluorescent pink-colored hard-type low-profile offset tread tires as standard. It is an effective tire because the tread can be changed by 10mm just by changing the direction of the tire and mounting it, and the small contact area reduces resistance when cornering. In addition, the gear was set to the initial speed gear of 3.5:1.

Sold out

TAMIYA 92438 1/32 MINI 4WD MACH FRAME FIGHTING KOREA EDITION (FM-A)

$30.00

Mach Frame Fighting Korea Edition

Tamiya Korea Special Kit #Fighting Korea Edition prepared with the message to endure the exhausting and difficult times caused by the long pandemic and prepare for tomorrow vigorously! The three colors, red, blue, and black, are reminiscent of the Taegeukgi in the same shape as a calligrapher's strong writing style.

The sticker design contains the strong spirit of Koreans.

Features
- ABS Resin Body (White)
- ABS Resin Chassis (Blue)
- A Parts (White Low-friction Resin)
- Low Friction Small Da. Low-profile Tires(Maroon) w/ Lettering
- 13mm Rollers
- Carbon Reinforced Wheel (Dish type)
- Efficient 4wd w/ Single-shaft Motor
- Gear Ratio 3.5:1
- Specially-designed Stickers

Sold out

Tamiya 95225 1/32 Mini 4WD Dash-4 Cannonball Premium (Super II Chassis)

$25.00

Specifications
???Length: 150mm ???Width: 97mm ???Height: 46mm ???Snap-together easy assembly

Separately Required Items
???R6/AA/UM3 batteries (x2)

Sold out

Tamiya 94753 1/32 Mini 4WD Aluminum Spacer Set

$12.00

Set includes 12mm, 3mm, and 1.5mm aluminum spacers (4pcs. each). In addition, silver stabilizer head (4pcs.) and 2x30mm stainless steel screws (4pcs.) are also included.

OUR BLOG