POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
Tamiya 95315 1/32 Mini 4WD 19Mm Alum Ball-Race Rollers Hg Lw (Ringless/Blue)
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
Tamiya 94389 AO-1011 620 Ball Bearing Two Set
TAMIYA 92449 1/32 MINI 4WD HG CARBON WIDE REAR STAY (3MM/SILVER) WAIGO HOBBY
To celebrate Waigo Hobby’s 50th anniversary in 2026, we’re launching a limited-edition HG Carbon Tune-up Part in a brand-new color scheme! 92449 HG Carbon Wide Rear Stay (3mm/Silver) Waigo Hobby marks Tamiya’s first use of silver carbon fiber stay paired with purple lettering, making it truly one-of-a-kind among tune-up parts! The 3mm silver carbon fiber parts are a rare specification that hasn’t been released in over a decade! This gives this limited edition product not only practical value but also added commemorative significance. The 3mm thickness offers greater rigidity compared to the standard 1.5mm carbon fiber plates on the market. It can replace modifications involving layered 1.5mm sheets, and the one-piece 3mm design provides enhanced strength and impact resistance. Additionally, the 3mm carbon fiber stay opens up new possibilities for parts selection in Stock Class competitions.
TAMIYA 18087 1/32 MINI 4WD HAWK RACER (SUPER II CHASSIS)
MINI 4WD 2.0mm HOLLOW PROPELLER SHAFT (FOR TYPE 5/SUPER FMシャーシ CHASSIS)
BEYBLADE X
GEAR SPORTS
SKYRC NC3000 OCTA AA/AAA NIMH/NICD BATTERY CHARGER/ANALYZER
Tamiya 95598 Neo VQS Advance Pack (VZ Chassis)
Tamiya 15432 SS Gear (SuperXX & SuperII)
Tamiya 18652 1/32 Mini 4WD Toyota Gazoo Racing TS050 Hybrid (MA Chassis)
Tamiya 95499 Lightweight 13mm Aluminum Ball-Race Rollers (Ringless/Black)
Beyblade X – UX-10 CUSTOMIZED SET U
This powerful parts set includes 4 types of blades, 3 types of ratchets, and 6 types of bits, allowing for 72 different customization possibilities.
The "Night Mail 3-85BS" can be made with the parts in the set. The blade has a built-in metal ball that absorbs vertical shocks, and the bits sink vertically to reduce shocks, making it a specialized Beyblade that reduces shaking caused by landing or attacks from above and below.
Tamiya 95439 1/32 Mini 4WD Gun Bluster XTO Light Blue Special (Polycarbonate Body) (FM-A Chassis)
DESCRIPTION
2019 marks 25 years since the start of the Fully Cowled Mini 4WD series, and what better way to celebrate than with a special version of the Gun Bluster XTO. It is one for the racers – it features a lightweight clear polycarbonate body, and is mounted on the cutting-edge FM-A chassis, a front motor unit with refined aerodynamics and an easy-access motor position. The muscular body comes with dedicated clear stickers.
TAMIYA 18103 1/32 MINI 4WD CROSS SPEAR 01 (VZ)
The Cross Spear 01 was designed by Takayuki Yamazaki, who also penned the DCR models among other Mini 4WD designs. Its body features eye-catching truss sections extending from front to rear, plus a canopy molded in tinted plastic. The VZ chassis is a compact base for the model, and comes in gray plastic with white A parts, accented by green spiral spoke wheels with small diameter, low-profile super hard tires.
VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. This chassis features a gear ratio of 3.5:1.
YB-520 YUTORI RACING ISC HG 520 BALL BEARING (PACK OF 4)
[520 Bearing (MC3)]
- ISC is a subsidiary of NSK Micro Precision Co., Ltd., a subsidiary of NSK Ltd., which holds the top market share in Japan and the third largest market share globally in its core bearing business.
- This high-performance bearing, made in Japan, uses a metal retainer that offers much higher precision and durability than conventional plastic retainers.
- Its high durability and long lifespan as a consumable item make it extremely economical in the long run.
- Strict management of the grinding wheels used in the super-finishing process and inner and outer diameter polishing reduces rotational resistance to nearly zero, improving pure cornering speed.
- Using this product on the axle components of small RC cars and rollers of fence cars will dramatically improve cornering performance.