POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
Mr McKenic Contact Cleaner and Lubricant
A cleaning solvent, Contact Cleaner & Lubricant removes dust, dirt, and deposits etc. from electrical and electronic contact points while lubricating the mechanism. It displaces moisture and helps to prevent short-circuits. At the same time, it leaves a protective film that prevents contact points from oxidation.
Tamiya 95315 1/32 Mini 4WD 19Mm Alum Ball-Race Rollers Hg Lw (Ringless/Blue)
Rollers on Mini 4WD vehicles are an optional upgrade part for any Mini 4WD race car. Tamiya Mini 4WD kits come standard with plastic rollers that usually measure 13mm or smaller. By adding larger 19mm rollers your vehicle will have a wider stance, thereby maintaining greater speed around high speed turns, while bouncing less off the walled circuit.
These lightweight aluminum roller parts have a weight reduction of around 30% over standard aluminum rollers thanks to their shape and holes, allowing speedy performance! Inbuilt 520 size bearings provide smooth movement. These rollers can be used in the front or rear of any Mini 4WD machine.
Tamiya 74131 Mini 4WD (+) Screw & Nut Driver PRO
This high-quality screwdriver set is useful for assembling and maintaining Mini 4WD cars. It consists of a Phillips screwdriver bit, a box screwdriver bit, and a rotating grip. The Phillips screwdriver bit can tighten 2mm screws securely without damaging them. It is inserted into the rotating grip.
The box screwdriver bit can tighten 2mm nuts, 2mm lock nuts, and 4mm ball sockets. Normally, it is left as is, but when you want to tighten it even more strongly, it is inserted into the rotating grip. In addition, the box screwdriver bit can be inserted into the Phillips screwdriver bit, making it compact to store and carry. It
consists of a chrome molybdenum vanadium steel Phillips screwdriver bit, a box screwdriver bit, and a rotating grip.
BEYBLADE X
GEAR SPORTS
Tamiya AO-1016 Mini 4WD G-13 Gear Pink 10 pcs (94691)
Original price was: $4.00.$3.00Current price is: $3.00.
TAMIYA 95104 MINI 4WD MULTI ROLLER SETTING STAY Hg Carbon (1.5Mm) J-Cup 2017
Original price was: $15.00.$12.00Current price is: $12.00.
TAMIYA 15516 1/32 MINI 4WD SETTING GEAR SET (for FM-A CHASSIS)
Original price was: $18.00.$12.50Current price is: $12.50.
Tamiya 85014 TS-14 BLACK
Tamiya 17006 1/32 JR Wild Mini 4WD Wildsaurus
TAMIYA 95652 MINI 4WD HG CARBON WIDE FRONT PLATE Ar Chassis 1.5Mm Asia Challenge
Tamiya 15233 1/32 Mini 4WD Screw Set B
Tamiya 15465 – MINI 4WD OIL APPLICATOR
Tamiya 95483 1/32 Mini 4WD Mach-Bullet Metallic Special (AR Chassis)
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, cooling the batteries and motor and extending their effectiveness. The air intakes on the chassis and body are integrated for optimal performance. The underpanel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features a 5:1 gear ratio.
