POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
Tamiya 18632 1/32 Mini 4WD Dash-01 Super Emperor (MS Chassis)
TAMIYA 1/32 MINI 4WD JR RAIKIRI PINK SPECIAL (POLYCARBONATE BODY) (MS CHASSIS)
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
TAMIYA 19435 1/32 MINI 4WD VANGUARD SONIC PREMIUM (CARBON SUPER-II CHASSIS)
TAMIYA 15418 1/32 MINI 4WD DOUBLE ALUMINUM ROLLERS w/RUBBER RINGS (13-12mm)
TAMIYA 94892 1/32 MINI 4WD JAPAN CUP JUNIOR CIRCUIT (RED/WHITE/BLUE)
Tamiya 95664 1/32 Mini 4WD Mini 4WD Low Friction Plastic Double Rollers (Blue/13-13mm)
【Item Contents/Information】
- 13mm (top and bottom) Double Rollers x2
- Rollers are molded in low-friction POM plastic (blue).
- These simple double rollers are 13mm top and bottom, and recommended for use on the rear of the car. They support the car if it leans, rolling on the lane wall.
- Can be used in conjunction with separately sold 520 ball bearings and bearing roller spacers, for a further performance boost.
- Screws and metal parts are also included.
BEYBLADE X
GEAR SPORTS
Tamiya 15150 FRP Mount Plate Set
TAMIYA 15490 1/32 MINI 4WD SIDE MASS DAMPER SET (for MA CHASSIS)
TAMIYA 95397 1/32 MINI 4WD 19MM ALUMINUM ROLLERS (5 SPOKES) W/PLASTIC RINGS (LIGHT BLUE)
TAMIYA 95696 1/32 MINI 4WD BUMPERLESS N-03/T-03 UNITS (RED)
Mini 4WD Nyet Nyet
Tamiya 95318 HG Angle Adjuster Chip Set
TAMIYA 95473 1/32 MINI 4WD COMPACT BLUE BAG
• Internal dimensions (approx.): 120mm (W) x 190mm (L) x 115mm (H).
• Can safely carry a load of around 1 kg.
• A safe, double-zippered way of carrying around a variety of Mini 4WD parts and accessories. Front and top open together for easy access.
• Comes in the blue used on the Avante Jr., with the Avante slogan and Tamiya logo printed on the side in yellow. Zippers are yellow.
TAMIYA 15473 1/32 MINI 4WD ALUMINUM SPACER SET (12/6.7/6/3/1.5mm)
Tamiya 18643 1/32 Mini 4WD Rise Emperor (MA chassis)
[A new emperor finally appears in the new dash machine] This is a plastic model assembly kit of a high-performance racer equipped with a double shaft motor. Hiroyuki Takei's mini 4WD manga "Hyper", which began serialization in the second issue of Shogakukan's "CoroCoro Aniki" Dash! Yonkuro''. The new machine driven by the main character, Yonkuro Hinomaru, is the Rise Emperor. The body design is based on the style of the popular first-generation Dash No. 1 Emperor and has been brushed up by Mr. Takei. The front and sides have been updated. Equipped with a strong frame that covers the body, the large air intake at the top of the canopy, which is a feature of the new dash machine, is also impressive.Details such as the canopy side lights and rear damper unit carried over from the first generation have been paid attention to. The shape is attractive.The chassis is an MA equipped with a double shaft motor that pursues drive efficiency.Slick tires are attached to the white-colored large diameter 4-spoke wheels. [
MA chassis that pursues drive efficiency] What is MA? , Abbreviation for Midship AERO. The "MS Chassis" has a mid-ship layout with a double shaft motor mounted in the center of the vehicle body, and the "AR Chassis" is designed with particular attention to airflow (aero) while driving. The "MA Chassis" combines all of the outstanding features into one chassis.Of course, by making use of the racing know-how accumulated over the years, it is equipped with six low-friction resin rollers and a rear skid bar as standard equipment. Driving performance has also been thoroughly refined.In addition, the use of an integrated monocoque structure further improves ease of assembly and maintenance, making it suitable for everyone from beginners to veteran racers, as well as street corner races held on smaller courses. It is a chassis that can be used in a wide range of applications, from official competitions on large special 5-lane circuits.A gear ratio of 4:1 is set.
Tamiya 95123 HG Carbon Reinforcing Plate for 13/19mm Roller (1.5mm) J-Cup 2019
• 2mm Thick Carbon Fiber Plates x2
• Plates feature printed Tamiya logo.
• Carbon fiber material provides excellent durability and strength.
• Features stylish carbon fiber surface pattern, and J-Cup/Tamiya print in Gold.
• Can be used with 13mm or 19mm rollers, providing set-up options.
• Screws and washers included.