POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
TAMIYA 95257 1/32 MINI 4WD HG FRP WIDE REAR STAY (3MM)
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
Tamiya 94389 AO-1011 620 Ball Bearing Two Set
Tamiya 18626 1/32 Mini 4WD Avante Mk.III Azure (MS Chassis)
YUTORI RACING OFFICIAL PIT MAT
- This high-quality rubber mat is perfect for small motor hobby pits.
- The YUTORI RACING image color is used throughout, with a brighter color in the foreground, making it easy to find dropped screws and other items, shortening work time.
- It is thick enough, smooth to the touch, and has a non-slip rubber backing.
- It reduces damage caused by chemical products, chip disposal, and dropped tools.
TAMIYA 92436 1/32 MINI 4WD LOW FRICTION TIRE MAROON, 2Pcs GOOD LIFE 50TH ANNIVERSARY
BEYBLADE X
GEAR SPORTS
TAMIYA 18640 1/32 MINI 4WD RAIKIRI (MA CHASSIS)
TAMIYA 95677 1/32 MINI 4WD JAPAN CUP JUNIOR CIRCUIT SPECIAL COLOR EDITION (YELLOW)
TAMIYA 95689 1/32 MINI 4WD THUNDER SHOT MK. II ASIA CHALLENGE 2025 SPECIAL (MS)
To commemorate the Tamiya Mini 4WD Asia Challenge 2025 (TMAC) which is planned in Taiwan in early summer 2025, this limited-edition release depicts our popular Item 18620 Thunder Shot Mk.II. It features a new color body (light smoke), MS chassis (light gray) with component parts (green), newly designed clear stickers and new packaging, which makes the car stand out!
Tamiya 15458 1/32 Mini 4WD Brake Set (AR Chassis)
Tamiya 19453 1/32 Mini 4WD Great Magnum R (FM-A Chassis)
TAMIYA 92455 1/32 MINI 4WD MACH FRAME FIGHTING KOREA EDITION VER.2 (FM-A/FINISHED MODEL)
This is a Finished Model Version.
The second version of MachFrame Fighting Korea Edition is here!
The 'Mach Frame Fighting Korea Edition', which received much love at the time of its release, has returned with a new look. While maintaining the same components as the previous model, a new ABS clear body has been adopted, and the matching sticker color scheme and material change have been completed. You can feel a different charm from the previous model through the clear body with the new sticker attached and the assembly completed. The FM-A chassis, which features a stable posture when jumping with a front motor layout, has been adopted as is, and the white color A part and blue color chassis configuration are the same. The Dish type carbon reinforced wheels are equipped with low-friction maroon tires that do not bounce well when landing and provide fast cornering performance. The sticker design, completed in three colors of red, blue, and black reminiscent of the Taegeukgi with a shape resembling a calligrapher's strong strokes, well expresses the Fighting Korea Edition that is both splendid and contains strong spirit.
Tamiya 95658 MINI 4WD OVAL HOME CIRCUIT (TWO-LEVEL LANE CHANGE) plus CHEVALIER & ESTOURA
2 Cars and a Circuit
This is a great set for getting started at home or in your club - it pairs the Oval Home Circuit with the popular Chevalier and Estoura car kits. Curve sections are molded in black, with lane change and straights in sky blue. Build your circuit and the cars, and get racing!
Course size when fully assembled: 216cm x 120cm. Two laps equal approximately 10 meters.
TAMIYA 95574 1/32 MINI 4WD RISE EMPEROR BLACK SPECIAL (MA CHASSIS)
Length: 156mm ‚ Width: 97mm ‚ Height: 48mm ‚ Includes double shaft motor ‚ Polycarbonate-ABS body (smoke) ‚ MA Chassis = tough Polycarbonate-ABS (black), A parts = low friction resin (yellow) ‚ Super hard and large-diameter slick tires (black/yellow pinstripe) ‚ 4 spoke wheels (Deep black plated)‚ Gear ratio=4:1‚ Includes metallic stickers
YC-004 YUTORI RACING TIRE & ROLLER SHAFT
With the single shaft chassis, you can perform tire processing and roller polishing. The roller processing section can accommodate rollers of various internal and external diameters by using the included attachment. The chassis uses high-precision 630/620 ball bearings to ensure the necessary rigidity of the shaft and to suppress axis wobbling during grinding, ensuring precision.