POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
Project D Wheel Piercer Hub
TAMIYA 86011 PS-11 PINK
$14.00SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
3PV Transmitter – 3(+1)-Channel Digital Proportional RC System
TRANSMITTER SPECS
T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 3+1* CHANNELS
*The 4th channel is used for mixing functions only.
COMMUNICATION METHOD:
Two-way (T-FHSS)/One-way(S-FHSS, FHSS) operation system.
MAXIMUM OPERATING RANGE:
80m (Optimum condition)
FOR SAFETY:
F/S, ID
TRANSMITTER FREQUENCY:
2.4 GHz band
POWER REQUIREMENT:
Size AA Dry Cell battery x 4 (6 V)
CURRENT DRAIN:
100 mA or less
TRANSMISSION ANTENNA:
1/2λ di-pole (Built-in)
RECEIVER SPECS
R304SB
T-FHSS
SIZE:
35.1 mm x 23.2 mm x 8.5 mm
WEIGHT:
6.6 g
OPERATING VOLTAGE:
DC 4.8V-7.4V
R203GF
S-FHSS/FHSS (Auto Detection)
SIZE:
39 mm x 26 mm x 10 mm
1.54 in x 1.02 in x 0.39 in
WEIGHT:
8 g
0.28 oz
OPERATING VOLTAGE:
DC 4.8V-7.4V
TAMIYA 15451 1/32 MINI 4WD FRP WIDE FRONT PLATE (for AR CHASSIS)
Turbo Racing 1/76 Mini Cooper RTR 2WD RC Car
Tamiya Mini 4WD Customised Low Friction Rollers Set A
Tamiya 10310 Mini 4WD Circuit Jump Ramp
BEYBLADE X
GEAR SPORTS
TAMIYA 18714 1/32 MINI 4WD MACH FRAME (FM-A CHASSIS)
TAMIYA 15360 1/32 MINI 4WD GOLD PLATED TERMINAL SET (for MS CHASSIS)
TAMIYA 15430 1/32 MINI 4WD FRP REAR MULTI ROLLER SETTING STAY
Tamiya 95651 1/32 Mini 4WD HG LIGHTWEIGHT 19mm TAPERED ALUMINUM BALL-RACE ROLLERS (RINGLESS)
Tamiya 18091 1/32 Mini 4WD Mach-Bullet (VS Chassis)
The VS chassis is a lightweight chassis featuring a short wheelbase. It features the main chassis, rear roller stay, rollers, gear cover and other A parts molded in black. Gold color lightweight wheels are paired with large-diameter arched tires in black. Comes with 5:1 speed gear. The body is also compatible with the Super-II and AR chassis.
TAMIYA 95463 1/32 MINI 4WD JR THUNDER SHOT MK.II CLEAR SPECIAl (MS CHASSIS)
MS Chassis
The MS Chassis has its double-shaft motor and batteries mounted at the center of the chassis for optimum weight distribution and superb stability at high speeds. The nose, center, and tail units are designed for easy attachment/detachment, allowing quick setting adjustments.
Specifications
★Length: 152mm ★Width: 92mm ★Double-shaft motor included ★Easy snap-together assembly
Separately Required Items
★R6/AA/UM3 batteries (x2)
Tamiya 95391 1/32 Mini 4WD Low Friction Roller Set (Blue & Light Green)
YC-006 YUTORI RACING GEAR/METAL OIL
Its robust performance allows it to withstand oil film breakdown even when used in jet engines. Its viscosity is second only to YC-003. It can withstand temperatures up to 400°C. It was put on the market after extensive testing by a world record holder in the world of fence cars, which operate at ultra-high speeds, ultra-high loads, and under constantly harsh conditions, reaching speeds of over 16 meters per second. It is effective in areas where durability is required, such as bearings.
Tamiya 94577 8T Plastic Pinion Gear Set (10pcs.)
Tamiya 95153 HG Carbon Front Stay For Fully Cowled Mini 4WD (1.5mm) J-Cup 2022
★This lightweight, 1.5mm thickness carbon fiber stay has holes for attachment of 9mm, 13mm or 19mm rollers in a wide position.
★The carbon fiber pattern will add some style to your car, as will the blue-green printed detailing including Tamiya and J-Cup logos.
★A plethora of holes ensures numerous setup options are at your disposal.
Tamiya 18080 1/32 Mini 4WD Bear Hawk RS (Super II Chassis)
TAMIYA 95668 1/32 MINI 4WD FULLY COWLED MINI 4WD COMPACT BAG (BLACK)
This handy little nylon bag is perfect for carrying your Mini 4WD car or parts, and can even take the Mini 4WD Parts Storage Box Set (Item 15460), the Mini 4WD Motor Case 2 (Item 15505) or the Mini 4WD Parts Case (Item 15163)! It has dual zippers and opens up nice and wide for easy access. This black back has pink printed logos: Fully Cowled Mini 4WD on the front and the Tamiya logo on the back.
★Interior dimensions: 120mm x 190mm x 115mm (height) ★Maximum load: 1kg