TAMIYA 18662 1/32 MINI 4WD AVANTE MK.III NERO
Original price was: $53.00.$44.00Current price is: $44.00.
This Mini 4WD kit takes the Avante MK. III Nero kit (item 18627) and pairs it with various performance parts including a Light Dash PRO Motor to get racers up to speed with a tuned chassis.
• Mini 4WD model assembly kit. Length: 155mm, width: 104mm, height: 42mm.
• Avante body is molded in Smoke ABS plastic.
• The MS chassis is molded in red ABS plastic, and the A Parts are molded in white ABS plastic.
• Light-Dash motor PRO is included. The model features a 3.7:1 gear ratio.
• Includes metallic stickers to decorate the car.
• Red fin-type wheels are paired with black super hard small diameter low-profile tires.
• Two AA batteries are required (sold separately).
| Weight | 0.194 kg |
|---|---|
| Dimensions | 23 × 14 × 6 cm |
Out of stock
Grade-Up Parts Included
• Light-Dash Motor PRO (Item 15402)
• 1.5mm FRP front stay (from Item 15242)
• 1.5mm FRP rear brake stay (from Item 15518)
• Front and rear FRP plates (two for front from Items 15242 and 15451, and two for rear from Items 15452 and 15472)
• MINI 4WD PRO High Speed EX Gear Set (for MS Chassis/Gear Ratio 3.7:1) (Item 15429 except for two plastic bearings)
• Low friction rollers x6
• Short slim mass dampers x2 (from Item 15501)
• Cylindrical mass dampers x2 (from Item 15459)
• 2mm diameter cap screws (25mm x2, 30mm x2) and hex wrench (from Item 15454)
Tools
Includes spanner, hex wrench and rubber tubing (one of each).
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
TAMIYA 1/32 MINI 4WD JR RAIKIRI PINK SPECIAL (POLYCARBONATE BODY) (MS CHASSIS)
★Both MS chassis and A parts are molded in vivid pink. An accent is provided by black rollers and wheels, plus gray tires.
★This image shows the underside of the MS chassis, which is composed of N-02, T-01 and standard type center units.
★The Raikiri body is molded in clear polycarbonate, with pre-cut wheel arches. It is roughly 10 grams lighter than its standard counterpart.
Specifications
★Length: 153mm ★Width: 89mm ★Height: 42mm ★Includes double-shaft motor ★Easy snap-together assembly
Separately Required Items
★R6/AA/UM3 batteries (x2)
Tamiya 18624 Hotshot Jr. (MS Chassis)
Tamiya’s first R/C 4WD racing buggy “Hotshot” now lines up in the Mini 4WD PRO Series as the “Hotshot Jr.” The dynamic form, front/rear dampers, large rear wing and minimum body cowling are all realistically reproduced on the modern MS Chassis, as well as pin spike tires on 4-spoke wheels which raise the mood of the buggy. The centrally located double shaft motor effectively transmits power to all four wheels for optimum performance and the “One-Touch” three piece chassis requires no glue and is a breeze to assemble. In addition, there is a large variety of Grade-Up Parts to choose from to customize your machine. This machine is definitely one for all Hotshot fans.
TAMIYA 92430 1/32 MINI 4WD AVANTE MK.III AZURE TAMIYA PLAMODEL FACTORY HONG KONG SPECIAL
To thank the supporters for the past 45 years. Waigo Hobby has decided to launch a 45th anniversary limited edition car kit.
It will be named as "AVANTE Mk3 TAMIYA PLAMODEL FACTORY HONG KONG SPECIAL" (Item: 92430).
It comes with a Carbon Polycarbonate Cowl with Black MS Chassis. To top it off, it has custom designed decals and tires to match the car. Specially for this kit, a transparent tire has been used to show the wordings "TAMIYA PLAMODEL FACTORY" words on the wheels itself!
This is definitely a car for the collectors!
Pre-Order likely to reach Singapore in 1st week of October.
