Tamiya 95319 1/32 Mini 4WD HG Threaded Bearing Bushing Set
$6.00
• Threaded Bearing Bushing x4
• Wrench x1
| Weight | 0.009 kg |
|---|---|
| Dimensions | 11 × 8 × 1 cm |
Out of stock
This bearing bushing set can be used with 9mm, 10mm, 11mm, & 13mm Diameter Guide Roller Ball Bearings. Because the bushing is threaded itself, it makes the screw stronger and less likely to bend. Also, thanks to the improved strength, the roller angle is also less likely to change even in the event of a big crash. Also, if the nut that secures the roller comes off, the bushing will not quickly come loose.
Compatible with rollers: Items 15344, 15345, 15475.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
TAMIYA 15392 1/32 MINI 4WD MASS DAMPER SET
This Mass Damper Set superbly demonstrates its excellent stabilizing qualities on Mini 4WD machines on technical courses with a lot of banked and raised sections.
3x25mm and 3x30mm stainless steel screws included.
You can install these dampers at either the front or rear of your Mini 4WD machine.
It is possible to adjust the movement range of the weights by changing the hex nut position.
Can be used with all Mini 4WD machines.
