POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
Tamiya 15510 1/32 Mini 4WD JR Countersunk Screw Set – Stainless Steel aww
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
TAMIYA 92435 YELLOW CHASSIS AND A PARTS ONLY
Beyblade X – BX-08 3on3 Deck Battle Set
WHAT'S IN THE BOX (3 BEYS):
- Blade: Hells Scythe
- Ratchet: 3-80
- Bit: Ball
- Blade: Wizard Arrow
- Ratchet: 4-60
- Bit: Needle
- Blade: Knight Shield
- Ratchet: 4-80
- Bit: Taper
- Premier Stickers
- Documentation (Japanese)
ABOUT 3on3 DECK BATTLE SET
- Manufacturer: Takara Tomy
- Product Code: BX-08 / BX14 08
- System: Xtreme Gear Sports
- UPC: 4904810910572
- Series: Beyblade X
SKYRC NC2200 AA/AAA BATTERY CHARGER/ANALYZER
The NC2200 charger is a compact charger for up to 4 rechargeable NiMH / NiCd batteries in sizes AA or AAA. With four independent slots, the batteries can be charged differently depending on their capacity. And to further increase comfort, the VA display shows the most important data such as the charging current, the battery capacity as well as the internal resistance, the voltage and the remaining time in real-time updates. This is only possible thanks to the extremely powerful Cortex-M3 processor from ARM, which is built into this loader.
FlexiPuls is another innovation in the options that the device can offer the user. During the life-time of a battery, for example, the internal resistance increases with each use. This therefore consumes more electricity and also makes the battery get hotter when charging. The FlexiPuls developed by SkyRC prevents this problem by reducing the charging current as soon as the NC2200 reaches a certain internal resistance value. This is not only economical, it is also ecological.
However, if that is not enough for You, the SkyCharger smartphone app and the Bluetooth dongle have the option of calling up all the information mentioned, a charging graph and updating the firmware of the device.
Tamiya 18656 1/32 Mini 4WD Roborace DevBot 2.0 (MA Chassis)
• 1/32 scale Mini 4WD model snap-together-assembly kit. Length: 156mm, width: 97mm.
• MA Chassis is molded in Black ABS plastic.
• Accent parts and rollers come in low friction Fluorescent Orange POM plastic.
• Four-piece design body molded in Flat Black ABS.
• Comes with stickers to recreate the flowing 4-color stripes, name, LED lights, car-side LED display and more.
• Black fin-type wheels are paired with Black low-profile tires.
• Type 130 double shaft motor included. The model features a 3.5:1 gear ratio.
• Two AA batteries are required (sold separately)
BEYBLADE X
GEAR SPORTS
TAMIYA 15398 1/32 MINI 4WD DOUBLE ALUMINIUM ROLLERS (13-12mm)
Tamiya 15508 Stainless Steel Screw Set
TAMIYA 18639 1/32 MINI 4WD ABILISTA (MA CHASSIS)
TAMIYA 15435 1/32 MINI 4WD BASIC TUNE-UP SET
Tamiya 19431 1/32 Mini 4WD Magnum Saber Premium (Super-II Chassis)
TAMIYA 18095 1/32 MINI 4WD HONDA E (VZ CHASSIS)
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS.
• Mini 4WD model assembly kit. Length: 158mm, width: 98mm.
• The VZ chassis is molded in Black ABS and paired with matching Black ABS A parts.
• Low-friction POM 620 plastic bearings (Black) provide smooth rotation.
• Body is molded in Yellow ABS, and stickers included to decorate the model, including optional number stickers for a racy look.
• Dish type wheels are paired with small diameter low-profile tires; both are Black.
• Included Type 130 motor is rear mounted, just like the actual car. The model features a 3.5:1 gear ratio.
Tamiya 95664 1/32 Mini 4WD Mini 4WD Low Friction Plastic Double Rollers (Blue/13-13mm)
【Item Contents/Information】
- 13mm (top and bottom) Double Rollers x2
- Rollers are molded in low-friction POM plastic (blue).
- These simple double rollers are 13mm top and bottom, and recommended for use on the rear of the car. They support the car if it leans, rolling on the lane wall.
- Can be used in conjunction with separately sold 520 ball bearings and bearing roller spacers, for a further performance boost.
- Screws and metal parts are also included.
TAMIYA 95148 1/32 MINI 4WD HG 19MM ALUMINUM BALL-RACE ROLLERS (RINGLESS) J-CUP 2021
This is a limited-edition version of the popular racing rollers from Item 15464 to commemorate Japan Cup 2021! These lightweight yet tough rollers have built-in 520 ball bearings for smooth movement, and can be used for both front and rear roller setups. The parts have a black anodized finish with blue Japan Cup logo!
TAMIYA 95142 1/32 MINI 4WD 2021 HYPER DASH MOTOR PRO
• Silver/carbon mix material brushes give balance of performance and reliability.
• Motor label is in gold and black.
• Input voltage: 2.4-3.0V.
• Torque at recommended load: 1.4-1.9mN-m.
• RPM: 17,200-21,200 r/min.
• Current consumption: 1.6-3.0A.
• Compatible with Mini 4WD PRO cars only.
• Use with 8T pinion gears (sold separately).