POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
Beyblade X – BX-03 Wizard Arrow 4-80B Starter Set
Turbo Racing 1/76 Mini Cooper RTR 2WD RC Car
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
3PV Transmitter – 3(+1)-Channel Digital Proportional RC System
TRANSMITTER SPECS
T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 3+1* CHANNELS
*The 4th channel is used for mixing functions only.
COMMUNICATION METHOD:
Two-way (T-FHSS)/One-way(S-FHSS, FHSS) operation system.
MAXIMUM OPERATING RANGE:
80m (Optimum condition)
FOR SAFETY:
F/S, ID
TRANSMITTER FREQUENCY:
2.4 GHz band
POWER REQUIREMENT:
Size AA Dry Cell battery x 4 (6 V)
CURRENT DRAIN:
100 mA or less
TRANSMISSION ANTENNA:
1/2λ di-pole (Built-in)
RECEIVER SPECS
R304SB
T-FHSS
SIZE:
35.1 mm x 23.2 mm x 8.5 mm
WEIGHT:
6.6 g
OPERATING VOLTAGE:
DC 4.8V-7.4V
R203GF
S-FHSS/FHSS (Auto Detection)
SIZE:
39 mm x 26 mm x 10 mm
1.54 in x 1.02 in x 0.39 in
WEIGHT:
8 g
0.28 oz
OPERATING VOLTAGE:
DC 4.8V-7.4V
Tamiya 15498 CARBON WIDE FRONT PLATE 1.5mm
TAMIYA 95603 1/32 Mini 4WD HURRICANE SONIC POLYCARBONATE BODY SPECIAL (AR CHASSIS) FULLY COWLED MINI 4WD 30TH ANNIVERSARY
Hurricane Sonic is Retsu Seiba’s third car in the legendary Mini 4WD cartoon series “Bakuso Kyodai Let’s & Go!!” and now it gets a special release with a lightweight polycarbonate body. Separate parts are used for the front wing/air intake, and metallic stickers are included. The AR chassis is molded in white, and yellow spiral spoke wheels are paired with super hard low-profile tires.
Tamiya Customised 35MM Super Speed Tires
Tamiya 18659 Mini 4WD Estoura (MA)
BEYBLADE X
GEAR SPORTS
BEYBLADE X – BX-00 / BXG-15 BOOSTER DRANZERSPIRAL 3-80T BLACK
TAMIYA 95666 1/32 MINI 4WD FULLY COWLED 30TH ANNIV. SUPER HARD LOW PROFILE TIRES & MATTE GREEN PLATED WHEELS
Tamiya 95147 Mini 4WD Car Catcher (J-Cup 2021 / Light Blue)
• Mini 4WD Car Catcher x1
• Made from durable 0.75mm thickness polypropylene (PP) colored in light blue.
• Small flaps in the catcher help slow the car and prevent the tires from locking up, and the shock absorption sheet protects the car from shock.
• Features the Japan Cup 2021 logo.
• Approximate assembled dimensions (external): 110mm x 190mm x 70mm (the size which can be stored in the lower section of the Tamiya Portable Pit).
• Compatible with all Mini 4WD and Mini 4WD PRO cars.
TAMIYA 95645 1/32 Mini 4WD DUAL RIDGE JR. CLEAR BODY SET
Tamiya 18707 1/32 Mini 4WD Rowdy Bull (FM-A Chassis)
Make Some Noise at the Track!
This Mini 4WD model assembly kit creates the Rowdy Bull, a brand new model with a muscular appearance bound to excite! It features a long, bulging bonnet with integrated air intake and a powerful-looking wide-fendered tail section. Dedicated marking stickers are included in the kit to decorate the body, as are silver color metal-plated A-spoke wheels, and low-profile tires.
Tamiya 95352 1/32 Mini 4WD Aluminum Motor Support (Red) Mini 4WD Station
TAMIYA 15046 GOLD PLATED TERMINAL B
Tamiya 19451 1/32 Mini 4WD Gun Bluster XTO Premium (FM-A Chassis)
TAMIYA 18714 1/32 MINI 4WD MACH FRAME (FM-A CHASSIS)
Mach Attack!
This assembly kit creates the Mach Frame, a stylish Mini 4WD racer whose body won the MERIT AWARD in the 2018 Mini 4WD Design Contest held in Japan. An innovative body design is comprised of a body and 3 separate frame components, with themes drawn from high-speed motorcycles and jets. Metallic stickers are included in the kit to decorate the model
TAMIYA 18629 1/32 MINI 4WD TRIDAGGER XX
Ryo Takaba's Powerful Machine
This assembly kit Mini 4WD Pro is one machine that you will love racing. The centrally located double shaft motor effectively transmits power to all four wheels for optimum performance. The three piece MS chassis requires no glue and is easy to assemble. You can enjoy and quickly customize your machine's set up. The boxy front fender and the uniquely shaped rear wing, accurately capture Ryo Takaba's Tridagger's powerful form as seen in the "Bakuso Kyodai Let's & Go" comic magazine. Along with the N-02 Nose Unit, red colored three spoke wheels with small diameter tires are equipped on this awesome machine.