POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
TAMIYA 15441 1/32 MINI 4WD BRAKE SPONGE SET (3 TYPES)
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
BEYBLADE X UX-16 CLOCK MIRAGE FULL SET
WHAT'S INCLUDED:
NOTES:
Inside the package is a surprise random Beyblade. It will be 1 of each of the 3 Beyblades you see pictured on the package.
Your package will contain one of each of the following Beys:
UX-16 01: ClockMirage 9-65B (Prize) [GREEN]
UX-16 02: ClockMirage 9-65B
UX-16 03: ClockMirage 9-65B [PINK]
TAMIYA 95463 1/32 MINI 4WD JR THUNDER SHOT MK.II CLEAR SPECIAl (MS CHASSIS)
MS Chassis
The MS Chassis has its double-shaft motor and batteries mounted at the center of the chassis for optimum weight distribution and superb stability at high speeds. The nose, center, and tail units are designed for easy attachment/detachment, allowing quick setting adjustments.
Specifications
★Length: 152mm ★Width: 92mm ★Double-shaft motor included ★Easy snap-together assembly
Separately Required Items
★R6/AA/UM3 batteries (x2)
Tamiya 95315 1/32 Mini 4WD 19Mm Alum Ball-Race Rollers Hg Lw (Ringless/Blue)
Rollers on Mini 4WD vehicles are an optional upgrade part for any Mini 4WD race car. Tamiya Mini 4WD kits come standard with plastic rollers that usually measure 13mm or smaller. By adding larger 19mm rollers your vehicle will have a wider stance, thereby maintaining greater speed around high speed turns, while bouncing less off the walled circuit.
These lightweight aluminum roller parts have a weight reduction of around 30% over standard aluminum rollers thanks to their shape and holes, allowing speedy performance! Inbuilt 520 size bearings provide smooth movement. These rollers can be used in the front or rear of any Mini 4WD machine.
Tamiya 15510 1/32 Mini 4WD JR Countersunk Screw Set – Stainless Steel aww
- 10mm Countersunk Screw x4
- 12mm Countersunk Screw x6
- 20mm Countersunk Screw x2
- 25mm Countersunk Screw x4
- 30mm Countersunk Screw x4
- Can be used as replacements for countersunk screws in limited edition VS & Super XX Evo.1 chassis.
- Easily countersink parts with item 74130 electric Router Countersink Bit (For 2mm Screws)
[PRE ORDER] TAMIYA 92464 1/32 MINI 4WD HONG KONG RACING TAXI (GREEN SPECIAL) (FM-A CHASSIS)
Ever since its release years ago, the Mini 4WD model kit “Hong Kong Racing Taxi” – a highly detailed model that authentically captures the look and feel of Hong Kong’s iconic red taxis – has been beloved by local and also global fans. Now, Tamiya Hong Kong proudly introduces a new addition to the lineup: the Hong Kong Racing Taxi (Green Special)!
The Green Special Version faithfully reproduces the New Territories Taxi, known locally as the “green cab,” which has served the New Territories region since 1976. As a Mini 4WD, this model stands out with its rare fluorescent yellow chassis and matching fluorescent yellow tires printed with “TAMIYA MINI 4WD” and “WAIGO HOBBY.” The A parts are molded in green to perfectly match the taxi’s signature color theme, making it a true head-turner on the racetrack!
Item 92464 1/32 Mini 4WD Hong Kong Taxi (Green Special) (FM-A Chassis) Assembly Kit Version includes a special motor, first released in Hong Kong! The included Torque-Tuned 2 motor features the Lion Rock emblem representing Hong Kong alongside the Tamiya and Waigo Hobby logos, enabling this Hong Kong taxi to race at full speed, embodying the Lion Rock spirit!
BEYBLADE X
GEAR SPORTS
TAMIYA 15546 1/32 MINI 4WD 31MM TIRES/CARBON WHEELS (LARGE DIAMETER/LOW FRICTION/ARCHED)
Project D Milling Tools Sets for Mini 4WD Counter Gear
TAMIYA 15506 1/32 MINI 4WD LIGHTWEIGHT PLASTIC SPACER SET
Tomica Premium 941620 – Unlimited Mini 4WD SERIES RC Buggy Grasshopper
Beyblade X – BX-08 3on3 Deck Battle Set
TAMIYA 18103 1/32 MINI 4WD CROSS SPEAR 01 (VZ)
The Cross Spear 01 was designed by Takayuki Yamazaki, who also penned the DCR models among other Mini 4WD designs. Its body features eye-catching truss sections extending from front to rear, plus a canopy molded in tinted plastic. The VZ chassis is a compact base for the model, and comes in gray plastic with white A parts, accented by green spiral spoke wheels with small diameter, low-profile super hard tires.
VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. This chassis features a gear ratio of 3.5:1.