POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
TAMIYA 69578 1/32 MINI 4WD JAPAN CUP BLUE/RED CIRCUIT CURVE SECTION (4PCS EACH)
• Curve Sections (Blue/Red) x4 for each
• Can be used with the Lane Change & Extension Set (sold separately).
• Includes instruction manual, notes, red/white zebra zone stickers and start line sticker.
• Comes in a corrugated cardboard box (dimensions: 64.1cm x 28cm x 41.4cm) which is easy to carry compared to the box of the full course.
BEYBLADE X CX-17 RANDOM BOOSTER VOL.10
WHAT'S INCLUDED:
1x Beyblade X Random Booster Select Beyblade.
NOTES:
Inside the package is a surprise random Beyblade. It will be 1 of the 6 Beyblades you see pictured on the package.
Your package could contain any one of the following Beys:
Each Random Booster will contain 1 of the 6 Beyblades:
UnicornDelta PO3-60GU (Rare) (CX)
Unicorn Delta P01-80GR (CX)
Samurai Saber 9-65LO (UX)
Hells Hammer 3-85GU (UX)
Tyranno Beat 3-60N (BX)
Crimson Garuda 7-80GU (BX)
Note: The specific Beyblade you receive is randomly determined. No guarantees can be made on which variant you will receive from the booster pack.
Completely sealed. Never opened.
TAMIYA 95613 MINI 4WD CLEARANCE GAUGE
No more falling foul of ground clearance regulations while pushing the envelope on your Mini 4WD car setup! This 1mm thickness gauge will instantly tell you whether your car has the 1mm of ground clearance required by official Tamiya Mini 4WD rules.
• Clearance Gauge (1mm) x1
• Carbon steel tool with plating applied. Features the Tamiya logo and the lettering “CLEARANCE GAUGE 1mm” laser inscribed.
• Dimensions: 150mm x 12.7mm. Thickness: 1mm.
BEYBLADE X
GEAR SPORTS
Tamiya 74121 Mini 4WD (+) Screw & Nut Driver PRO (Copy)
Original price was: $15.00.$11.00Current price is: $11.00.
TAMIYA 18629 1/32 MINI 4WD TRIDAGGER XX
Original price was: $28.00.$25.00Current price is: $25.00.
TAMIYA 95716 1/32 MINI 4WD CARBON REARR ROLL STAY SUPER X 1.5MM – ASIA CHALLENGE 2026
Original price was: $16.00.$14.00Current price is: $14.00.
Tamiya 19438 1/32 Mini 4WD Ray Stinger Premium (Super-II Chassis)
Sting when you're Winning
This is a premium version of the Ray Stinger, a machine which appeared in the Japanese cartoon "Let's and Go!"as the car of one of the heroes' rivals, Rei Hijikata. The body of the racer has a stylized front cowl dubbed the "stinger cowl", plus other exciting features such as body side ducts and jet aero duct on the rear cowl. The silver scheme is accented perfectly by metallic stickers inspired by the design seen in the original cartoon.
TAMIYA 15532 1/32 MINI 4WD LOW FRICTION PLASTIC DOUBLE ROLLERS (black/19-19mm) black
About the Model
★Expand your rear roller setup options with these parts, which have upper and lower rollers both 19mm in diameter.
★The top roller acts on the course fence to help your car retain shape when it loses balance.
★Rollers are molded in low friction POM plastic, and on account of their large diameter, are able to deal with bigger bumps in the course fence.
★Separately sold 520 ball bearing washers can be used for a further upgrade.
★The image at right shows this product fitted to Item 18658 Chevalier (MA), along with other separately sold Grade-Up parts.
324 OBJECT WHEEL INSTALLER
TAMIYA 15400 1/32 MINI 4WD FLUORINE COATED GEAR SHAFT (RIBBED, 2PCS.)
TAMIYA 92460 1/32 MINI 4WD COPPERFANG TKC 30TH ANNIVERSARY SPECIAL (FM-A CHASSIS)
A special Copper Fang to celebrate Tamiya Korea's 30th anniversary in 2026!
To celebrate Tamiya Korea's 30th anniversary in 2026, we have prepared a special Copper Fang.
The body of the Copper Fang, which features the FM-A chassis with a front motor layout for a stable posture when jumping, is made up of a clear blue, white A-parts, and a light blue chassis. In addition, the white A-spoke wheels are paired with light blue hard-type tires that do not bounce as much when landing and have less cornering deceleration than the tires that come standard with other kits. In honor of the passion and achievements of 30 years, the sticker designed with the concept of shining wings makes the blue and white colored machine stand out even more. Also included is a Rev-Tune 2 motor with a 30th anniversary sticker attached exclusively for this kit.
Tamiya 95442 1/32 Mini 4WD Aluminum Spacer Set (12/6.7/6/3/1.5mm, 2pcs. each) (Gold)
Tamiya 95554 Mini 4WD Multipurpose Tape 20mm (Red)
