POPULAR CATEGORIES

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

1.

Free Delivery.

Free - $150 and above

2.

Order As a Gift.

Surprise your loved ones.

3.

High Quality.

100% Authentic premium quality toys.

4.

Compete.

Engage in friendly competition.

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

Tamiya AO-1019 94773 1/32 Mini 4WD G2 Gear(Orange/10Pcs)

Original price was: $4.00.Current price is: $3.00.
Content
  • G2 Gear x 10

 

Usable with
  • Mini 4WD Cars
-13% Sold out

TAMIYA 15529 1/32 MINI 4WD LOW FRICTION PLASTIC DOUBLE ROLLERS (BLACK/13-13mm)

Original price was: $4.00.Current price is: $3.50.

★ These simple dual rollers are 13mm top and bottom, and recommended for use on the rear of the car. They support the car if it leans, rolling on the lane wall.
★ They are molded in low-friction material, and can be used in conjunction with separately sold 520 ball bearings, or bearing roller spacers, for a further performance boost.
★ Small parts plus a wrench for attachment included.

Compatible Cars
MA, VZ & AR Chassis cars

TAMIYA 15345 1/32 MINI 4WD 11mm BALL BEARINGS (2PCS.)

Original price was: $9.50.Current price is: $8.00.

‚òÖMake sure your rollers roll smoothly by fitting ball bearings! ‚òÖThese two ball bearings have an 11mm outer diameter, and

-13% Sold out

Tamiya 95285 HG Carbon Stay for Wide Rear Sliding Damper (2mm)

Original price was: $16.00.Current price is: $14.00.

• Made from durable 2mm thick carbon fiber.
• Carbon fiber stays offer an approximate weight saving of 40% over standard aluminum ones.
• Tamiya logo is printed in white.
• Screws and washers, etc. are included for attachment.

TAMIYA 95175 1/32 MINI 4WD HYPER DASH PRO J-CUP 2025

Original price was: $7.00.Current price is: $6.00.

This limited-edition release of the double-shaft Hyper-Dash Motor PRO (Item 15375) commemorates Japan Cup 2025. It is a balanced, high-performance motor, equally at home on a variety of course types and a great tune-up option for advanced racers.

TAMIYA 18639 1/32 MINI 4WD ABILISTA (MA CHASSIS)

Original price was: $20.00.Current price is: $16.00.

Looks Like a Winner!
The Abilista is the fifth model to appear on the midship motor layout MA Chassis. Just one glance at the alluring super sports car-inspired body will be enough to convince you that this is a must-have model, with the stylish long nose short-deck form accentuated by sumptuous curves. Bulging front and rear fenders accentuate the slimline center of the car nicely, while an eye-catching wing not only gives a sporty look, it also has air outlets that combine with the front intake to boost the model's aerodynamics. The color scheme is an understated yet effective white with blue tones and gold trim, with metallic stickers included to recreate headlights, windows and taillights. The model rolls on white dish-type wheels with low-profile tires.

Sold out

Tamiya 95570 Mini 4wd Penguin Racer (VZ Chassis)

$28.00

• Mini 4WD model assembly kit. Length: 158mm, width: 98mm, height: 45mm.
• Low-friction (POM 620) plastic bearings give smooth rotation.
• The Penguin Racer figure comes pre-assembled and painted.
• Dedicated stickers are included to decorate the model.
• Gold color plated 6-spoke wheels are paired with large diameter hard low-profile tires molded in white.
• Type 130 motor is included. The model features a 5:1 gear ratio.

TAMIYA 15472 1/32 MINI 4WD FRP WIDE FRONT PLATE FOR FULLY COWLED MINI 4WD

Original price was: $4.50.Current price is: $4.00.

★ This FRP stay can be simlpy applied to any fully-cowled Mini 4WD machine, without the need for any body

OUR BLOG