POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
TAMIYA 95653 MINI 4WD HG CARBON WIDE REAR PLATE Ar Chassis 1.5Mm Asia Challenge
TAMIYA 15526 1/32 MINI 4WD BASIC TUNE-UP PARTS SET for VZ CHASSIS
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
TAMIYA 15438 1/32 MINI 4WD REINFORCED GEARS W/Easy Locking Gear Cover
This set contains 8T pinion and crown gears made from durable carbon-reinforced nylon resin material. Set also comes with a newly designed Super-II chassis rear gear cover which enables quick gear cover attachment/ detachment thanks to a lever. The gear cover is also made from carbon-reinforced nylon resin material.
TAMIYA 95680 1/32 MINI 4WD HG ALUMINUM WHEELS for SMALL DIA. NARROW TIRES (24mm) (REVERSIBLE, 2PCS.)
These high quality aluminum wheels are for use with small-diameter (24mm) tires: heavier than plastic wheels, they contribute to a lower center of gravity and enhanced stability. They can be fitted to only one end of the car to fine-tune its balance, or even reversed to allow use with Super X and Super XX chassis cars.
★Four bushings are also included.
Tamiya 19444 1/32 Mini 4WD Beat-Magnum Premium (AR Chassis)
This is a Premium release in the Fully Cowled Mini 4WD series of the Beat-Magnum (original Item: 19421). This car was driven by hero Go Seiba in the popular Mini 4WD cartoon series "Let"s & Go!!". It utilizes the AR Chassis, which places great emphasis upon aerodynamics, also offering users a blend of durability, customization and ease of maintenance.
SKYRC NC2200 AA/AAA BATTERY CHARGER/ANALYZER
The NC2200 charger is a compact charger for up to 4 rechargeable NiMH / NiCd batteries in sizes AA or AAA. With four independent slots, the batteries can be charged differently depending on their capacity. And to further increase comfort, the VA display shows the most important data such as the charging current, the battery capacity as well as the internal resistance, the voltage and the remaining time in real-time updates. This is only possible thanks to the extremely powerful Cortex-M3 processor from ARM, which is built into this loader.
FlexiPuls is another innovation in the options that the device can offer the user. During the life-time of a battery, for example, the internal resistance increases with each use. This therefore consumes more electricity and also makes the battery get hotter when charging. The FlexiPuls developed by SkyRC prevents this problem by reducing the charging current as soon as the NC2200 reaches a certain internal resistance value. This is not only economical, it is also ecological.
However, if that is not enough for You, the SkyCharger smartphone app and the Bluetooth dongle have the option of calling up all the information mentioned, a charging graph and updating the firmware of the device.
324 Object Pinon Installer & Remover
BEYBLADE X
GEAR SPORTS
Tamiya 18713 1/32 Mini 4WD Razorback (FM-A Chassis)
TAMIYA 18704 1/32 MINI 4WD SHADOW SHARK (AR CHASSIS)
TAMIYA 15400 1/32 MINI 4WD FLUORINE COATED GEAR SHAFT (RIBBED, 2PCS.)
TAMIYA 95682 1/32 MINI 4WD REINFORCED GEAR COVER (for MS CHASSIS) FLUORESCENT ORANGE MINI 4WD STATION
Tamiya 18081 1/32 Mini 4WD Daihatsu Kopen (Future Included) RMZ (VS Chassis)
Tamiya 18702 1/32 Mini 4WD Aero Thunder Shot (AR chassis)
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. The air intakes on the chassis and body are integrated for optimal performance. This high-speed racing chassis also features low-friction plastic bearings to ensure that any loss of power from the engine to the wheels is minimal in nature. The under-panel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features a 4.2:1 gear ratio.
YC-006 YUTORI RACING GEAR/METAL OIL
Its robust performance allows it to withstand oil film breakdown even when used in jet engines. Its viscosity is second only to YC-003. It can withstand temperatures up to 400°C. It was put on the market after extensive testing by a world record holder in the world of fence cars, which operate at ultra-high speeds, ultra-high loads, and under constantly harsh conditions, reaching speeds of over 16 meters per second. It is effective in areas where durability is required, such as bearings.
TAMIYA 15390 1/32 Mini 4WD FLOURINE COATED GEAR SHAFT (STRAIGHT, 2PCS.)
Tamiya 95460 1/32 Mini 4WD Large Dia. Narrow Fiberglass Wheels & Arched Tires (Fluorescent Pink)
Tamiya 95650 1/32 Mini 4WD New Year’s Edition “Year Of The Dragon 2024”
THIS IS A PRESALE. ITEM TO REACH IN JANUARY 2024.
Happy New Year 2024!
This assembly kit creates a special Mini 4WD car that commemorates 2024 - the year of the dragon in the Chinese zodiac. We have chosen the Mach Bullet body and paired it with a dragon driver. Stickers are included to take care of body details like the front grille, plus other decorations, and the driver is pre-assembled and painted. The Super-II chassis is a tried and tested platform.