POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
TAMIYA AO-94774 MINI 4WD WHEEL BUSHINGS BLACK
Original price was: $4.00.$3.00Current price is: $3.00.
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
BEYBLADE X BXG-22 BOOSTER DRAGOON STORM 4-60RA
What’s Included
- Blade: DragoonStorm
- Ratchet: 4-60
- Bit: Rubber Accel
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Attack
- Series: Beyblade X
- System: X-Over Project
- Bey Weight Range: 35.0-39.99g
- Bey Weight: 34.5g
- Spin Direction: Left
- Primary Color: White
- Attributes: Special Release
- Packaging: NIP
- Alias: DragoonStorm Four Sixty Rubber Accel
- ASIN: 4904810099468
3PV Transmitter – 3(+1)-Channel Digital Proportional RC System
TRANSMITTER SPECS
T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 3+1* CHANNELS
*The 4th channel is used for mixing functions only.
COMMUNICATION METHOD:
Two-way (T-FHSS)/One-way(S-FHSS, FHSS) operation system.
MAXIMUM OPERATING RANGE:
80m (Optimum condition)
FOR SAFETY:
F/S, ID
TRANSMITTER FREQUENCY:
2.4 GHz band
POWER REQUIREMENT:
Size AA Dry Cell battery x 4 (6 V)
CURRENT DRAIN:
100 mA or less
TRANSMISSION ANTENNA:
1/2λ di-pole (Built-in)
RECEIVER SPECS
R304SB
T-FHSS
SIZE:
35.1 mm x 23.2 mm x 8.5 mm
WEIGHT:
6.6 g
OPERATING VOLTAGE:
DC 4.8V-7.4V
R203GF
S-FHSS/FHSS (Auto Detection)
SIZE:
39 mm x 26 mm x 10 mm
1.54 in x 1.02 in x 0.39 in
WEIGHT:
8 g
0.28 oz
OPERATING VOLTAGE:
DC 4.8V-7.4V
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
BEYBLADE X
GEAR SPORTS
YT-004-1 YUTORI RACING 620 BALL BEARING SET (2 PIECES)
Original price was: $8.50.$7.00Current price is: $7.00.
Tamiya 74131 Mini 4WD (+) Screw & Nut Driver PRO
Original price was: $34.00.$28.00Current price is: $28.00.
Tamiya 15357 Mini 4WD FRP Side Extension Roller Mount
Original price was: $4.50.$3.50Current price is: $3.50.
TAMIYA 18625 1/32 MINI 4WD DASH-1 EMPEROR(MS CHASSIS)
Original price was: $19.00.$16.00Current price is: $16.00.
TAMIYA 18655 1/32 MINI 4WD TOYOTA GR SUPRA (MA CHASSIS)
Original price was: $21.00.$17.00Current price is: $17.00.
Beyblade X BXG-01 / BX-00 Dranzer Spiral 3-80T
Tamiya 95630 – VZ Chassis Set (Red)
Tamiya 19440 1/32 Mini 4WD Cyclone Magnum Premium (AR Chassis)
The Cyclone Magnum is now available on the modern AR Chassis. The futuristic body was previously mounted on the Super chassis. The Japanese Mini 4WD cartoon Let"s & Go! is a known throughout Japan and this vehicle was featured in the cartoon and it was driven by one of the main characters Go Seiba. The AR Chassis places great emphasis upon aerodynamics, also offering users a blend of durability, customization and ease of maintenance.
Tamiya 92425 1/32 Little Ryan (VS Chassis)
Korean popular Little Ryan drives the Mini 4WD
Plastic model assembly kit for high performance racers with shaft drive four-wheel drive
The open-top body inspired by a single seater buggy, plus a driver doll of Little Ryan from the popular character of the popular messenger app "Kakao Talk" in Korea.
This doll has a cute little expression, of course, it is also assembled and painted.
The body color is coordinated with pastel blue that shows off Little Ryan's oranges.
Also included is a set of stickers with orange inspired pop graphics and specially designed to represent the logo.
The combination of stickers on the wheel and clear type tires makes it very attractive for your feet.
TAMIYA 15506 1/32 MINI 4WD LIGHTWEIGHT PLASTIC SPACER SET
Beyblade X – UX-06 LEON CREST 7-60GN
Tamiya 95584 1/32 Mini 4WD Hi-Mount Tube Stabilizer Set (Clear Yellow)
Tube Stabilizers x3
• Stabilizers are for attachment to front rollers, and help balance the car if it loses shape during a corner.
• Stabilizer dimensions: 8mm diameter, 10mm in height.
• Parts are molded in green ABS plastic.
• Small parts for attachment included.
• Compatible with Mini 4WD & Mini 4WD PRO cars.
