POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
TAMIYA 95714 1/32 MINI 4WD HG ALUMINIUM BALL-RACE ROLLERS 19MM RINGLESS – ASIA CHALLENGE 2026
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
TAMIYA 95379 1/32 MINI 4WD LIGHTWEIGHT DOUBLE ALUMINUM ROLLERS (13-12MM)
These rollers for MINI 4WD race cars provide smooth and stable cornering, with the smaller top roller supporting the car when it leans through a corner section.
• Lightweight Double Aluminum Rollers x2
• About 20% lighter than standard equivalents (Item 15398)
• 520 ball bearings, spacers, screws and nuts are included.
• Compatible with Mini 4WD and Mini 4WD PRO cars.
SKYRC NC2200 AA/AAA BATTERY CHARGER/ANALYZER
The NC2200 charger is a compact charger for up to 4 rechargeable NiMH / NiCd batteries in sizes AA or AAA. With four independent slots, the batteries can be charged differently depending on their capacity. And to further increase comfort, the VA display shows the most important data such as the charging current, the battery capacity as well as the internal resistance, the voltage and the remaining time in real-time updates. This is only possible thanks to the extremely powerful Cortex-M3 processor from ARM, which is built into this loader.
FlexiPuls is another innovation in the options that the device can offer the user. During the life-time of a battery, for example, the internal resistance increases with each use. This therefore consumes more electricity and also makes the battery get hotter when charging. The FlexiPuls developed by SkyRC prevents this problem by reducing the charging current as soon as the NC2200 reaches a certain internal resistance value. This is not only economical, it is also ecological.
However, if that is not enough for You, the SkyCharger smartphone app and the Bluetooth dongle have the option of calling up all the information mentioned, a charging graph and updating the firmware of the device.
Tamiya 95460 1/32 Mini 4WD Large Dia. Narrow Fiberglass Wheels & Arched Tires (Fluorescent Pink)
Tamiya 95050 Duralumin Wide F/R Plate (Pink)
Tamiya 94893 Mini 4WD Oval Home Circuit (Two-Level Lane Change) (Red/White/Blue)
BEYBLADE X
GEAR SPORTS
324 OBJECT BRAKE CUTTER AND BRAKE HEAT PRESS (2 IN 1)
TAMIYA 18646 1/32 MINI 4WD DCR-01 (MA CHASSIS)
TAMIYA 95679 1/32 MINI 4WD NEW YEAR’S EDITION “YEAR OF THE HORSE 2026”
Tamiya Customised MS Floating Gear Double Shaft 3.5 (15349)
Newly deigned high precision engineered MS Floating Gear - 3.5:1
Double layered AO520 bearing for extra smoothness of the gear
Bearing is held by the inner metal ring made by 15345 (11mm ball bearing roller)
520 Bearings can be replaced easily after wear and tear
Paired with precised engineered shaft for both front and rear gear usage.
BEYBLADE X CX-18 BRACHIOWHIP FULL SET
Tamiya 87022 Model Paints & Finishes Molybdenum Grease
Tomica Premium 941620 – Unlimited Mini 4WD SERIES RC Buggy Grasshopper
'- RC Buggy Grasshopper now available in Tomica Premium Unlimited!
- [Tomica Premium Unlimited] is a Tomica series that reproduces cars that have appeared in various scenes such as movies, TV dramas, and comics, and whose charming roles are vividly remembered, to the fullest extent possible with detailed modeling and painting.
- This is the "Tomica that adults can get excited about" series, which has infinite possibilities and can be enjoyed not only by adults who used to play with Tomica, but also by fans of the series.
- Product contents: Tomica Premium Unlimited main unit (1)
(C) TOMY
(C)TAMIYA
Item Size/Weight : 12.1 x 8 x 4.1 cm / 73g
Jan Code: 4904810941620
Tamiya 74130 Mini 4WD 2mm countersunk screw hole drilling bit (for electric router)
[Ideal for precision countersunk holes] This tool is used to make holes for 2mm countersunk screws in carbon and FRP parts of Mini 4WD cars. The tip of the bit can be used to chamfer holes for 2mm countersunk screws, and the side of the bit can be used to shape holes into plate shapes. Attach to an electric handheld router (ITEM74042).