POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
Tomica PREMIUM 12 Morris Mini (936466)
PANASONIC ENELOOP LITE PAPER PACKING (2 PCS)
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
SkyRC MC5000 Cylindrical Battery Charger and Analyzer
Slide to Fit.
Every Cylindrical Battery.
Thanks to the spring-loaded sliding negative contact, this powerhouse adapts effortlessly to 44* cylindrical battery sizes, seamlessly accommodating everything from AA/AAA to 21700/32700—all in one device.
*With so many cylindrical battery sizes on the market, full coverage may not be guaranteed.
Na-ion* Ready.
Powering What’s Next.
MC5000 now supports Na-ion batteries, stepping into the next generation of energy.
Thanks to MC5000, enjoy better low-temp performance, faster charging, and smarter integration—all in one device.
Start the future with Na-ion.
*Sodium-ion (Na-ion) batteries are an exciting alternative to lithium-ion technology, offering the potential for wider adoption thanks to their lower cost and abundant raw materials—especially in cylindrical cells for portable devices.
Unleash the Power, Charge at Full Speed.
With 5000mA of turbocharged current, your batteries wake up instantly and reach full capacity in no time. 80W of raw power drives four channels simultaneously, ensuring maximum efficiency.
Charge faster. Wait less!
Multiple Modes, Activated as Needed.
Up to six intelligent working modes*, tailored to meet the unique needs of different battery types—from everyday charging to advanced maintenance, all in one device.
*Supported modes may vary by battery type. Refer to the interface for available options.
TAMIYA 18706 1/32 MINI 4WD STARTER PACK AR SPEED SPEC (AERO AVANTE)
Wired for Speed
Get ready to race! This handy set combines the popular Aero Avante Mini 4WD car kit with race spec option parts and basic tools. Fitting the option parts in the set turns the Aero Avante into a swift racer suited to tracks with long straight sections and fewer corners. Included are a Rev-Tuned 2 motor, super hard tires (black), brake set, side mass damper set and FRP plates for the front and rear of your car. With relatively few spacers and screws, assembly is kept simple. The Aero Avante body is molded in blue and paired with the aerodynamically efficient AR chassis in black.
AR Chassis
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are key ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. Air intakes on the chassis and body are integrated for optimal performance. Low-friction plastic bearings ensure that any loss of power from the engine to the wheels is minimal in nature. Under panel and diffuser can be removed from the model without taking off the body. Features a 3.5:1 gear ratio.
TAMIYA 95128 1/32 MINI 4WD HYPER DASH 3 MOTOR J-CUP 2020
Tomica Transporter Subaru Impreza WRX Type R STi Version (91258)
TAMIYA 92457 1/32 MINI 4WD HG CARBON REAR BRAKE STAY (1.5MM) TAMIYA KOREA 30TH ANNIVERSARY
Parts that help improve the performance and settings of the machine.
This is a lightweight and strong carbon rear brake stay with a special logo printed in red to commemorate the 30th anniversary of Tamiya Korea. It is an indispensable part on courses with ups and downs, and the area where the brake sponge is attached is large, so it can reduce interference with the rollers. The carbon pattern and the 30th anniversary logo greatly enhance the racing atmosphere, drawing attention during the race. There are also many holes for installing mass dampers, etc. 2mm screws and aluminum spacers for installation are also provided.
BEYBLADE X
GEAR SPORTS
TAMIYA 15345 1/32 MINI 4WD 11mm BALL BEARINGS (2PCS.)
Beyblade X BX-36 Random Booster Whale Wave Select
TAMIYA 95517 1/32 MINI 4WD HYUNDAI I20 COUPE
Tamiya 15090 Zero Chassis Gold Plated Terminal Set
TAMIYA 15422 1/32 MINI 4WD MINI 4WD PINION PULLER
TAMIYA 95159 1/32 HYPER-DASH MOTOR PRO J-CUP 2023
• Silver and carbon mixed material brushes ensure both electrical efficiency and durability.
• The motor label is gold and black, and the end bell in red.
• Input voltage: 2.4-3.0V.
• Torque at recommended load: 1.4-1.9mN-m.
• RPM: 17,200-21,200.
• Current consumption: 1.6-3.0A.
• Compatible with Mini 4WD PRO cars only.
• Use with 8T pinion gears (sold separately).
Tamiya 15524 FRP Wide Front Plate (VZ Chassis)
Tamiya 95352 1/32 Mini 4WD Aluminum Motor Support (Red) Mini 4WD Station
TAMIYA 95179 1/32 MINI 4WD HG HG CARBON REAR ROLLER STAY
This limited-edition Mini 4WD carbon reinforcement plate commemorates Japan Cup 2025. While the hole positions are the same as the popular FRP plate sold as Item 15243 (JR FRP Rear Plate for Super X Chassis), this plate features a new shape and the Japan Cup and Tamiya logos in mint green print. This rigid carbon fiber plate reinforces your car's bumper, helping it to survive big bumps and crashes, while also maximizing roller effects.