POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
TAMIYA 18716 1/32 MINI 4WD GEO GLIDER (FM-A CHASSIS)
Original price was: $20.00.$16.00Current price is: $16.00.
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
TAMIYA 95164 1/32 MINI 4WD MACH FRAME SILVER METALLIC (FM-A CHASSIS)
Mach Attack!
This is Tamiya 1/32 Mini 4WD JR Mach Frame Silver Metallic FM-A Chassis Kit. The FM-A chassis is a front motor unit with advanced aerodynamic themes that – thanks to its center of gravity toward the front – is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with a low-friction front skid bar, while the chassis underside allows easy access to the motor and quick setup changes. Aircraft-inspired aero side stays allow attachment of a range of Grade-Up parts. The chassis is molded in durable ABS, with low friction A parts such as underpanel. The model includes a motor and 3.5:1 gears.
3PV Transmitter – 3(+1)-Channel Digital Proportional RC System
TRANSMITTER SPECS
T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 3+1* CHANNELS
*The 4th channel is used for mixing functions only.
COMMUNICATION METHOD:
Two-way (T-FHSS)/One-way(S-FHSS, FHSS) operation system.
MAXIMUM OPERATING RANGE:
80m (Optimum condition)
FOR SAFETY:
F/S, ID
TRANSMITTER FREQUENCY:
2.4 GHz band
POWER REQUIREMENT:
Size AA Dry Cell battery x 4 (6 V)
CURRENT DRAIN:
100 mA or less
TRANSMISSION ANTENNA:
1/2λ di-pole (Built-in)
RECEIVER SPECS
R304SB
T-FHSS
SIZE:
35.1 mm x 23.2 mm x 8.5 mm
WEIGHT:
6.6 g
OPERATING VOLTAGE:
DC 4.8V-7.4V
R203GF
S-FHSS/FHSS (Auto Detection)
SIZE:
39 mm x 26 mm x 10 mm
1.54 in x 1.02 in x 0.39 in
WEIGHT:
8 g
0.28 oz
OPERATING VOLTAGE:
DC 4.8V-7.4V
Tamiya Mini 4WD 95634 Low Friction Small Dia. Narrow Tires (24mm) & 3-Spoke Wheels
★This set includes white 3-spoke wheels and maroon low-friction tires.
★Thanks to their hard compound, these low grip-tires minimize bounce after airtime and also facilitate quicker cornering.
★Employ all four, or experiment with using them on the front or rear, left or right only to fine-tune your setup.
BEYBLADE X BXG-41 JURASSIC WORLD SPINOSAURUS VS QUETZALCOATLUS
WHAT'S INCLUDED:
- The Beyblade X Jurassic World Collab Spinosaurus vs. Quetzalcoatlus Multipack Set includes 2 right-spinning tops and 2 launchers (Beystadium required, sold separately).
Completely sealed. Never opened.
INFO:
Ages: 8+
Compatibility: Beyblade X
Condition: NIP (New In Packaging)
Brand: Takara Tomy
UPC: 996569LE
BEYBLADE X
GEAR SPORTS
TAMIYA 92451 1/32 MINI 4WD MACH FRAME FIGHTING KOREA EDITION VER.2 (FM-A)
Original price was: $38.00.$28.00Current price is: $28.00.
BEYBLADE X BX-48 RANDOM BOOSTER – METAL COAT EDITION – FULL SET
Original price was: $95.00.$85.00Current price is: $85.00.
TAMIYA 15549 1/32 MINI 4WD HG CARBON WIDE REAR PLATE 2MM (SLIDING DAMPER)
Original price was: $16.00.$14.00Current price is: $14.00.
TAMIYA 95379 1/32 MINI 4WD LIGHTWEIGHT DOUBLE ALUMINUM ROLLERS (13-12MM)
Original price was: $22.00.$18.00Current price is: $18.00.
Beyblade X – BX-15 Leon Claw 5-60P Starter Set
Beyblade X – BX-08 3on3 Deck Battle Set
WHAT'S IN THE BOX (3 BEYS):
- Blade: Hells Scythe
- Ratchet: 3-80
- Bit: Ball
- Blade: Wizard Arrow
- Ratchet: 4-60
- Bit: Needle
- Blade: Knight Shield
- Ratchet: 4-80
- Bit: Taper
- Premier Stickers
- Documentation (Japanese)
ABOUT 3on3 DECK BATTLE SET
- Manufacturer: Takara Tomy
- Product Code: BX-08 / BX14 08
- System: Xtreme Gear Sports
- UPC: 4904810910572
- Series: Beyblade X
Tamiya 95570 Mini 4wd Penguin Racer (VZ Chassis)
• Mini 4WD model assembly kit. Length: 158mm, width: 98mm, height: 45mm.
• Low-friction (POM 620) plastic bearings give smooth rotation.
• The Penguin Racer figure comes pre-assembled and painted.
• Dedicated stickers are included to decorate the model.
• Gold color plated 6-spoke wheels are paired with large diameter hard low-profile tires molded in white.
• Type 130 motor is included. The model features a 5:1 gear ratio.
Tamiya 95151 1/32 Hyper-Dash Motor PRO J-Cup 2022
Tamiya 95383 MINI 4WD CAR CATCHER Mini 4Wd Station/Black
Picking up a running Mini 4WD machine is a potential source of injury no longer thanks to this catcher. It features a simple fold-together assembly design, with a protruding flap on the lower surface to slow the car as it enters the catcher. This specific car catcher is a color variation of the Mini 4WD Station version of the popular car catcher.
Tamiya 95110 1/32 Mini 4WD Dash-1 Emperor Memorial (MS Chassis) 30 Years of The Japan Cup
• The MS chassis is molded in Black (main chassis) and Red (N-02 and T-01 Units) ABS.
• White 6-spoke wheels are paired with super hard Black low-profile tires featuring sidewall lettering (JAPAN CUP 30 YEARS SINCE 1988).
• Features dedicated metallic stickers to decorate the body including a commemorative “30 years” sticker design.
• Type 130 motor included. The model features a 4:1 gear ratio.
• Two AA batteries are required (sold separately).
TAMIYA 95170 1/32 MINI 4WD HYPER-DASH MOTOR PRO J-CUP 2024
This is a special commemorative model of the Hyper Dash Motor PRO, a high-performance double-shaft motor for advanced users of Mini 4WD PRO. The mount and motor label feature the "JAPAN CUP 2024" logo. The motor label is coordinated with a luxurious gold and black color, and the end bell is red. This motor is perfect for racing, as well as for souvenirs. Uses silver carbon brushes that combine high electrical efficiency and durability. A double-shaft motor exclusively for Mini 4WD PRO. *8T pinion gear sold separately.
