POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
TAMIYA 18631 1/32 MINI 4WD SPIN-AXE MK.II (MS CHASSIS)
Tamiya 86005 PS-5 BLACK
$14.00SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
Tamiya 95150 MINI 4WD Hyper-Dash 3 Motor J-Cup 2022
TAMIYA 95680 1/32 MINI 4WD HG ALUMINUM WHEELS for SMALL DIA. NARROW TIRES (24mm) (REVERSIBLE, 2PCS.)
These high quality aluminum wheels are for use with small-diameter (24mm) tires: heavier than plastic wheels, they contribute to a lower center of gravity and enhanced stability. They can be fitted to only one end of the car to fine-tune its balance, or even reversed to allow use with Super X and Super XX chassis cars.
★Four bushings are also included.
Tamiya 95324 Adjustable Mass Dampers (2.5g Weights x6)
Tamiya 18643 1/32 Mini 4WD Rise Emperor (MA chassis)
[A new emperor finally appears in the new dash machine] This is a plastic model assembly kit of a high-performance racer equipped with a double shaft motor. Hiroyuki Takei's mini 4WD manga "Hyper", which began serialization in the second issue of Shogakukan's "CoroCoro Aniki" Dash! Yonkuro''. The new machine driven by the main character, Yonkuro Hinomaru, is the Rise Emperor. The body design is based on the style of the popular first-generation Dash No. 1 Emperor and has been brushed up by Mr. Takei. The front and sides have been updated. Equipped with a strong frame that covers the body, the large air intake at the top of the canopy, which is a feature of the new dash machine, is also impressive.Details such as the canopy side lights and rear damper unit carried over from the first generation have been paid attention to. The shape is attractive.The chassis is an MA equipped with a double shaft motor that pursues drive efficiency.Slick tires are attached to the white-colored large diameter 4-spoke wheels. [
MA chassis that pursues drive efficiency] What is MA? , Abbreviation for Midship AERO. The "MS Chassis" has a mid-ship layout with a double shaft motor mounted in the center of the vehicle body, and the "AR Chassis" is designed with particular attention to airflow (aero) while driving. The "MA Chassis" combines all of the outstanding features into one chassis.Of course, by making use of the racing know-how accumulated over the years, it is equipped with six low-friction resin rollers and a rear skid bar as standard equipment. Driving performance has also been thoroughly refined.In addition, the use of an integrated monocoque structure further improves ease of assembly and maintenance, making it suitable for everyone from beginners to veteran racers, as well as street corner races held on smaller courses. It is a chassis that can be used in a wide range of applications, from official competitions on large special 5-lane circuits.A gear ratio of 4:1 is set.
Tamiya 15193 1/32 Mini 4WD FRP Reinforcing Plate Set
BEYBLADE X
GEAR SPORTS
TAMIYA 15489 1/32 MINI 4WD ATOMIC-TUNED 2 MOTOR PRO
TAMIYA 18716 1/32 MINI 4WD GEO GLIDER (FM-A CHASSIS)
BEYBLADE X BXG-12 BX-00 25TH ANNIVERSARY SET
TAMIYA 18629 1/32 MINI 4WD TRIDAGGER XX
BEYBLADE X CX-18 BRACHIOWHIP FULL SET
Tamiya 95566 Brake Sponge Set (1mm Red)
TAMIYA 95146 1/32 MINI 4WD HG CARBON REAR BRAKE STAY (1.5MM) J-CUP 2021
This limited-edition carbon rear brake stay celebrates Japan Cup 2021! This carbon item is the same shape as the FRP equivalent in Item 15518. It incorporates the Japan Cup and Tamiya logos in blue print.
About the Rear Brake Stay:
The FRP plate in this set is an optimum size to allow attachment of separately sold brake sponge, while minimizing the chance of contact with parts like double rollers. Brakes are a vital racing item that stabilize your car before it jumps, which can make all the difference in a race.
TAMIYA 95786 1/32 MINI 4WD PORTABLE PIT PURPLE (ASIA CHALLENGE 2026)
To commemorate the Tamiya Mini 4WD Asia Challenge 2026 (TMAC), this limited-edition Mini 4WD Portable Pit includes two commemorative stickers!
The carrying case is designed specifically with Mini 4WD users in mind and can be used to hold everything including tools, batteries, parts, and the machines themselves. It is a convenient item for keeping all your Mini 4WD items in one place.
Protected: Beyblade X – BX-23 Phoenix Wing 9-60 GF (Mold 3, 2025)
BEYBLADE X BX-43 GEAR CASE WHITE
TAMIYA 19446 1/32 MINI 4WD GREAT BLASTSONIC (AR CHASSIS)
This is a brand-new 4WD machine, which is to appear in a modern update of the ???Let???s & Go!!" Mini 4WD comic in Japan. ??As keen Mini 4WD fans may catch from its name, the Great Blastsonic ??? driven by hero Retsu Seiba ??? takes some design cues from previous Sonic successors. It is based on the AR Chassis, which is designed to offer its driver durability, customizability and ease of maintenance.
YUTORI RACING OFFICIAL PIT MAT
- This high-quality rubber mat is perfect for small motor hobby pits.
- The YUTORI RACING image color is used throughout, with a brighter color in the foreground, making it easy to find dropped screws and other items, shortening work time.
- It is thick enough, smooth to the touch, and has a non-slip rubber backing.
- It reduces damage caused by chemical products, chip disposal, and dropped tools.