POPULAR CATEGORIES

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

1.

Free Delivery.

Free - $150 and above

2.

Order As a Gift.

Surprise your loved ones.

3.

High Quality.

100% Authentic premium quality toys.

4.

Compete.

Engage in friendly competition.

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

TAMIYA 95699 1/32 MINI4WD K4TASCHE VIVID SPECIAL (PINK/GREEN) (FM-A CHASSIS)

Original price was: $24.00.Current price is: $21.00.

This assembly kit creates a Vivid Special version of the K4Tasche, a Mini 4WD racer with a retro pickup truck body molded in transparent light gray and featuring rounded headlights and a rear bed; you can even fit a Mini 4WD figure into the driver’s seat. The FM-A chassis offers superb stability, and comes in fluorescent pink with fluorescent green A parts. Stickers are included to decorate the car.

Sold out

Tamiya 15443 Low-Profile Tire & 1-Way Wheel Set

$12.00

★These one-way wheels are designed for use with lightweight low-profile tires and offer fast and smooth cornering performance. ★Compatible with

-23% Sold out

TOMICA PREMIUM 926870 – UNLIMITED MINI 4WD AVANTE JR. BLACK SPECIAL

Original price was: $21.95.Current price is: $16.95.

'- Mini 4WD Avante Jr. Black Special is now available in Tomica Premium Unlimited!

- [Tomica Premium Unlimited] is a Tomica that reproduces cars that have appeared in various scenes such as movies, dramas, and comics, and whose charming activities are vividly remembered through modeling and detailed painting.
- This is a [Tomica that adults can enjoy] series that has infinite potential and can be enjoyed not only by adults who used to play with Tomica but also by fans of the work.

(C) TOMY
(C)TAMIYA

TAMIYA 15527 1/32 MINI 4WD STAINLESS STEEL COUNTERSUNK SCREW SET (6/8/15mm)

Original price was: $5.00.Current price is: $4.00.

★With the correct holes, countersunk screws sit flush to the surface they are attached on, for less chance of catching on the track surface, etc. and causing damage or loss of speed.

★This set includes ten each of 6mm, 8mm and 15mm screws crafted in stainless steel.

-15% Sold out

BEYBLADE X UX-18 MUMMY CURSE FULL SET

Original price was: $135.00.Current price is: $115.00.

WHAT'S INCLUDED:
Each individual set will contain all of the 6 following Beyblades.

NOTES:
UX-18 01: MummyCurse 7-55W (Prize) x1
UX-18 02: MummyCurse 4-60C x1
UX-18 03: PegasusBrush M3-85W x1
UX-18 04: SolBrave C9-70TP x1
UX-18 05: DranDagger 7-55G x1
UX-18 06: WeissTiger 4-80LR x1

INFO:

Ages: 8+

Compatibility: Beyblade X
Condition: NIP (New In Packaging)
Brand: Takara Tomy

-30% Sold out

Tamiya 95481 1/32 Mini 4WD Aluminum Spacer Set (12/6.7/6/3/1.5mm, 2pcs. each) (Black)

Original price was: $10.00.Current price is: $7.00.

• (inner diameter x outer diameter x length)
• 2.1 x 4 x 1.5mm Spacer x2
• 2.1 x 4 x 3mm Spacer x2
• 2.1 x 4 x 6mm Spacer x2*
• 2.1 x 4 x 6.7mm Spacer x2*
• 2.1 x 4 x 12mm Spacer x2

TAMIYA 19452 1/32 MINI 4WD BROCKEN GIGANT PREMIUM (FM-A CHASSIS)

Original price was: $22.00.Current price is: $19.50.

This is a Mini 4WD racing machine. It recreates the Brocken Gigant race car and it sits atop the FM-A chassis. Fans of Japanese cartoon “Let’s & Go!!” will remember the Brocken Gigant as the car driven by the hero’s rival Kondo Gen.

-27% Sold out

Tamiya 95667 Mini 4WD Fully Cowled Mini 4WD 30th Anniversary Multi-Tape (15mm width, Black/Pink)

Original price was: $11.00.Current price is: $8.00.
This multi-tape features 18 carefully selected popular machines from "Let's & Go!!" (first series) and the silhouettes of the machines are laid out in a line. It is now 15mm wide x 10m long. This is a standard size for tapes with a wide variety of designs. It is recommended not only for racing but also as a collection.

OUR BLOG