POPULAR CATEGORIES

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

1.

Free Delivery.

Free - $150 and above

2.

Order As a Gift.

Surprise your loved ones.

3.

High Quality.

100% Authentic premium quality toys.

4.

Compete.

Engage in friendly competition.

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

FUJITSU 4x AA HR-3UTC 1900MAH (WHITE)

Original price was: $28.00.Current price is: $24.00.
  • Nominal voltage: 1.2V
  • Typical capacity: 2100mAh
  • Minimum capacity: 1900mAh
  • Low self discharge (LSD)
  • Retains 85% charge after one year, 70% after 5 years.
  • Rechargeable up to 2100 times.
Sold out

Tamiya 95535 Brake Set (for AR Chassis) (Fluorescent Yellow)

$8.00

• 90mm Brake Plate x1
• AR Chassis Adapters x2
• Flourescent YELLOW color.
• 5mm width Brake Sponges x4 (low-friction x2, high-friction x2)
• Spacers (3mm, 4.5mm, 9mm) x 2 each
• Screws also included.
• Compatible with AR, MA and Super-II chassis. MS and FM-A chassis using Item 15430 are also compatible.

-16% Sold out

SKYRC NC2200 AA/AAA BATTERY CHARGER/ANALYZER

Original price was: $95.00.Current price is: $80.00.

The NC2200 charger is a compact charger for up to 4 rechargeable NiMH / NiCd batteries in sizes AA or AAA. With four independent slots, the batteries can be charged differently depending on their capacity. And to further increase comfort, the VA display shows the most important data such as the charging current, the battery capacity as well as the internal resistance, the voltage and the remaining time in real-time updates. This is only possible thanks to the extremely powerful Cortex-M3 processor from ARM, which is built into this loader.

FlexiPuls is another innovation in the options that the device can offer the user. During the life-time of a battery, for example, the internal resistance increases with each use. This therefore consumes more electricity and also makes the battery get hotter when charging. The FlexiPuls developed by SkyRC prevents this problem by reducing the charging current as soon as the NC2200 reaches a certain internal resistance value. This is not only economical, it is also ecological.

However, if that is not enough for You, the SkyCharger smartphone app and the Bluetooth dongle have the option of calling up all the information mentioned, a charging graph and updating the firmware of the device.

TAMIYA 18661 1/32 MINI 4WD LEXUS LBX MORIZO RR (MA CHASSIS)

Original price was: $22.00.Current price is: $19.50.

This Mini 4WD car assembly kit depicts the Lexus LBX MORIZO RR which is based upon the popular Lexus LBX compact cross. The distinctive front grille and signature rear blade light design are realistically captured. Stickers recreate lights and black roof. The efficient MA chassis has its double-shaft motor in the center. Fin type wheels are paired with low-profile tires.

The Ultra-Efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has six individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike. This chassis features a gear ratio of 3.5:1.

-17% Sold out

TAMIYA 95187 1/32 MINI 4WD HG CARBON REAR MULTI ROLLER SETTING STAY (1.5MM) J-CUP 2026

Original price was: $18.00.Current price is: $15.00.

This commemorative version of the durable Carbon Rear Multi Roller Setting Stay (1.5mm) is to be released in conjunction with the Japan Cup 2026 next summer. It has a wealth of attachment holes and a daring new shape, plus unique purple print!

-17% Sold out

Project D Milling Tools Sets for Mini 4WD Counter Gear

Original price was: $30.00.Current price is: $25.00.

Prefect tool to mill all your counter gear.

Sold out

Tamiya 15163 Mini 4WD Parts Case

[vc_row][vc_column][vc_column_text]‚òÖThis handy case is divided internally into six compartments, with space for pinion gears, screws, nuts, ball bearings and other

OUR BLOG