POPULAR CATEGORIES

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

1.

Free Delivery.

Free - $150 and above

2.

Order As a Gift.

Surprise your loved ones.

3.

High Quality.

100% Authentic premium quality toys.

4.

Compete.

Engage in friendly competition.

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

TAMIYA 18639 1/32 MINI 4WD ABILISTA (MA CHASSIS)

Original price was: $20.00.Current price is: $16.00.

Looks Like a Winner!
The Abilista is the fifth model to appear on the midship motor layout MA Chassis. Just one glance at the alluring super sports car-inspired body will be enough to convince you that this is a must-have model, with the stylish long nose short-deck form accentuated by sumptuous curves. Bulging front and rear fenders accentuate the slimline center of the car nicely, while an eye-catching wing not only gives a sporty look, it also has air outlets that combine with the front intake to boost the model's aerodynamics. The color scheme is an understated yet effective white with blue tones and gold trim, with metallic stickers included to recreate headlights, windows and taillights. The model rolls on white dish-type wheels with low-profile tires.

TAMIYA 92436 1/32 MINI 4WD LOW FRICTION TIRE MAROON, 2Pcs GOOD LIFE 50TH ANNIVERSARY

Original price was: $7.00.Current price is: $4.80.

Original Tamiya Mini 4WD
92436 Low Friction Low Profile Medium Diameter Tire Good Life 50th Ann. Marnoon Tires

Sold out

Tamiya 95606 Lightweight Double Aluminum Rollers (13-12mm/Green)

$22.00

• Lightweight Double Aluminum Rollers x2
• Rollers have a green anodized finish.
• 520 Ball Bearings x4
• 2x20mm Screws x2
• Around 20% lighter than standard equivalents (Item 15398).
• Brass spacers and small parts for attachment included.
• Compatible with Mini 4WD and Mini 4WD PRO cars.

Sold out

Tamiya 15436 1/32 Mini 4WD Large Diameter Stabilizer Head Set (17mm)

$9.00

[vc_row][vc_column][vc_column_text]Tamiya 15436 Large Diameter Stabilizer Head Set (17mm)[/vc_column_text][/vc_column][/vc_row]

-21% Sold out

TAMIYA 1/32 MINI 4WD JR RAIKIRI PINK SPECIAL (POLYCARBONATE BODY) (MS CHASSIS)

Original price was: $28.00.Current price is: $22.00.

★Both MS chassis and A parts are molded in vivid pink. An accent is provided by black rollers and wheels, plus gray tires.

★This image shows the underside of the MS chassis, which is composed of N-02, T-01 and standard type center units.

★The Raikiri body is molded in clear polycarbonate, with pre-cut wheel arches. It is roughly 10 grams lighter than its standard counterpart.

Specifications
★Length: 153mm ★Width: 89mm ★Height: 42mm ★Includes double-shaft motor ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

TAMIYA 15344 1/32 MINI 4WD 9mm BALL BEARINGS (2PCS.)

Original price was: $9.50.Current price is: $8.00.

òÖMake sure your rollers roll smoothly by fitting ball bearings! ‚òÖThe two ball bearings have a 9mm outer diameter, and

Sold out

TAMIYA 92432 – ALUMINUM SPACER SET (12/6.7/6/3/1.5MM, 4 PCS. EACH) BLACK TAMIYA KOREA 25TH ANNIVERSARY

$24.00

• 2.1 x 4 x 1.5mm Spacers x2
• 2.1 x 4 x 3mm Spacers x2
• 2.1 x 4 x 6mm Spacers x2
• 2.1 x 4 x 6.7mm Spacers x2
• 2.1 x 4 x 12mm Spacers x2

-18% Sold out

Tamiya 95387 HG Mass Damper Set w/Ball Connectors (Block Weight/Carbon Plate)

Original price was: $17.00.Current price is: $14.00.

★The mass damper in this set comes with ball connectors. It is perfect for use on courses with repeated elevation changes.

★1.5mm thickness carbon fiber plate has white lettering print.

★Adjusters are molded in red glass fiber-reinforced resin.

OUR BLOG