POPULAR CATEGORIES

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

TAMIYA MINI4WD

Let's Get Back On Track!

1.

Free Delivery.

Free - $150 and above

2.

Order As a Gift.

Surprise your loved ones.

3.

High Quality.

100% Authentic premium quality toys.

4.

Compete.

Engage in friendly competition.

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

Tamiya 15420 Mini 4WD AA Ni-MH battery Neo Champ (2)

Original price was: $18.00.Current price is: $16.00.

It is a high-performance rechargeable nickel-metal hydride battery that can be used in the official competition of Tamiya.

BEYBLADE X CX-15 RAGNA RAGE FE4-5

$14.95

WHAT'S INCLUDED:

  • Lock Chip - Ragna
  • Over Blade - Flow
  • Metal Blade - Rage
  • Assist Blade - Erase
  • Ratchet - 4-55
  • Bit - Yielding

ABOUT CX-15 Ragna Rage FE4-55Y

  • Manufacturer: Takara Tomy
  • Product Code: CX-15 / CX15
  • System: Xtreme Gear Sports
  • Series: Beyblade X
  • ASIN: 4904810097273

TAMIYA 15490 1/32 MINI 4WD SIDE MASS DAMPER SET (for MA CHASSIS)

Original price was: $10.50.Current price is: $9.00.

New FRP Side Plate x2
6x6x32mm Block Weight x2
2x20mm Screw & Stabilizer Ball Cap x4
Compatible with MA Chassis cars.
Stabilizer ball caps are molded in yellow. It will match perfectly with Item 15476 Basic Tune-Up Parts Set for MA Chassis.

tamiya-92467-mach-frame-korea-edition-ver-3
-20% Sold out

TAMIYA 92467 1/32 MINI 4WD MACH FRAME FIGHTING KOREA EDITION VER. 3 (FM-A CHASSIS)

Original price was: $40.00.Current price is: $32.00.

The third version of Mach Frame Fighting Korea Edition is here!

The 'Mach Frame Fighting Korea Edition', which received much love at the time of its release, has returned with a new look. While maintaining the same components as the previous model, a new ABS metallic black body has been adopted, and the matching sticker color scheme and material change have been completed. You can feel a different charm from the previous model through the clear body with the new sticker attached and the assembly completed. The FM-A chassis, which features a stable posture when jumping with a front motor layout, has been adopted as is, and the white color A part and blue color chassis configuration are the same. The Dish type carbon reinforced wheels are equipped with low-friction maroon tires that do not bounce well when landing and provide fast cornering performance. The sticker design, completed in three colors of red, blue, and black reminiscent of the Taegeukgi with a shape resembling a calligrapher's strong strokes, well expresses the Fighting Korea Edition that is both splendid and contains strong spirit.

  • Red F-MA Chassis
  • Carbon Wheels
  • Low Friction Tires
  • Black Metallic Cowl
Sold out

Tamiya 86048 PS-48 Semi-Gloss Silver Anodized Aluminum

$17.50

Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.

* The colors shown are Web Approximate color for display. It may differ from the actual paint color.

PLUS FitCut Curve Twiggy Scissors

Original price was: $9.00.Current price is: $8.10.
  • Bernoulli curved blades maintain the best angle to grip the object being cut — cuts smoothly from the base of the blades all the way to the tip
  • Long blade enables efficiency for cutting objects with length
  • Smart handle is designed to smoothly cut loose threads on cloth with one hand
  • Secure locking structure that follows the natural finger movement — take off cap and slide handle to unlock with one hand
  • Always secured with automatic locking system, even when blades are left unlocked, they will lock automatically when cap is placed
  • Slim shape for easy carrying
  • Excellent for cutting white brakes
Select options This product has multiple variants. The options may be chosen on the product page

TAMIYA 95183 1/32 MINI 4WD HYPER-DASH MOTOR PRO J-CUP 2026

Original price was: $15.00.Current price is: $12.00.

This is a special version of the Mini 4WD Hyper-Dash Motor PRO released to commemorate the Japan Cup 2026, and with red end bell and dedicated label. It is at home on a range of courses, from twisting and turning technical ones to straight-dominated speed layouts. *8T pinion gears are sold separately.

-20% Sold out

Tamiya 18645 1/32 Mini 4WD Silwolf (MA Chassis)

Original price was: $25.00.Current price is: $20.00.

The ultra-efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focused upon achieving outstanding aerodynamic performance. It has a gear ratio of 3.5:1, 6 individual rollers, a rear skid bars and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike.

OUR BLOG