POPULAR CATEGORIES

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

1.

Free Delivery.

Free - $150 and above

2.

Order As a Gift.

Surprise your loved ones.

3.

High Quality.

100% Authentic premium quality toys.

4.

Compete.

Engage in friendly competition.

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

Tamiya 15533 Mini 4WD SKID-TAPE 80X120MM

Original price was: $5.00.Current price is: $4.00.
Crafted in low-friction PET plastic, these stickers can be attached to your car’s bumper, chassis and the like to help it glide over the circuit. and maintain speed. It will also help your car slide back into its lane if it happens to get up on top of the circuit wall. Each sheet can be used on larger or more specific smaller areas – simply cut to the desired shape and size with scissors, etc.
Sold out

TAMIYA 95563 1/32 MINI 4WD HG LIGHTWEIGHT 17MM ALUMINUM BALL-RACE ROLLERS (RINGLESS)

$15.00

• 17mm Lightweight Aluminum Ball-Race Rollers x2
• Eight holes in each roller make for an individual weight of 0.81 grams, a saving of roughly 0.25 grams per roller.
• Small parts for attachment are included.
• Built-in 520 ball bearings provide smooth roll.
• Compatible with Mini 4WD and Mini 4WD PRO cars. Some bodies may require modification.

TAMIYA 15501 1/32 MINI 4WD SLIMLINE MASS DAMPER SET

Original price was: $8.00.Current price is: $5.50.

This set includes 2 each of 2 different lengths of 7mm diameter mass damper, which measure 5.5mm (1.5g) and 11.5mm (3g) respectively.

324 Object Pinon Installer & Remover

Original price was: $18.00.Current price is: $15.00.

324 Object Pinon Installer and Remover

Installs your pinon accurately and safely without damaging the pinon.

SkyRC MC5000 Cylindrical Battery Charger and Analyzer

Original price was: $234.00.Current price is: $195.00.

Slide to Fit.
Every Cylindrical Battery.
Thanks to the spring-loaded sliding negative contact, this powerhouse adapts effortlessly to 44* cylindrical battery sizes, seamlessly accommodating everything from AA/AAA to 21700/32700—all in one device.
*With so many cylindrical battery sizes on the market, full coverage may not be guaranteed.

Na-ion* Ready.
Powering What’s Next.
MC5000 now supports Na-ion batteries, stepping into the next generation of energy.
Thanks to MC5000, enjoy better low-temp performance, faster charging, and smarter integration—all in one device.
Start the future with Na-ion.
*Sodium-ion (Na-ion) batteries are an exciting alternative to lithium-ion technology, offering the potential for wider adoption thanks to their lower cost and abundant raw materials—especially in cylindrical cells for portable devices.

Unleash the Power, Charge at Full Speed.
With 5000mA of turbocharged current, your batteries wake up instantly and reach full capacity in no time. 80W of raw power drives four channels simultaneously, ensuring maximum efficiency.
Charge faster. Wait less!

Multiple Modes, Activated as Needed.
Up to six intelligent working modes*, tailored to meet the unique needs of different battery types—from everyday charging to advanced maintenance, all in one device.
*Supported modes may vary by battery type. Refer to the interface for available options.

Sold out

Tamiya 95151 1/32 Hyper-Dash Motor PRO J-Cup 2022

$12.00

★Input voltage: 2.4-3.0V
★Torque at recommended load: 1.4-1.9mN-m
★RPM: 17,200-21,200
★Current consumption: 1.6-3.0A

Compatible Cars
Mini 4WD PRO cars

-27% Sold out

Tamiya 74121 Mini 4WD (+) Screw & Nut Driver PRO (Copy)

Original price was: $15.00.Current price is: $11.00.

This plus (&) head screwdriver has been designed with a shorter bit for optimum use on Mini 4WD models, and is comfortable for use by adults and children alike. The high-precision CNC machined bit helps prevent damage to screw heads. An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control of the tool.

  • For use with PH1 (2-2.6mm; JIS M2-M2.6) plus (&) head screws.
  • Bit diameter/length: 3mm/50mm
  • Red and Black grip features the Tamiya twin star logo.

OUR BLOG