POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
TAMIYA 15347 1/32 MINI 4WD PRO GEAR BEARING SET (for MS Chassis)
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
Mr McKenic Universal Cleaner
Product description:
Mr McKenic® – Universal Cleaner is a all-purpose solvent cleaner that effectively cleans and removes oil, grease and stain residues from all surfaces.
Available Size: 386gm Aerosol
Product features:
- Cleans off dirt, dust and other contaminants
- Removes oil and grease stains
- Leaves no residue
- Powerful and effective
- Fast-drying
- Non-conductive
- Non-corrosive
- Safe on most surfaces
Beyblade X – BX-07 Start Dash Set
Tamiya 95208 1/32 LOW FRICTION TIRE
TAMIYA 92449 1/32 MINI 4WD HG CARBON WIDE REAR STAY (3MM/SILVER) WAIGO HOBBY
To celebrate Waigo Hobby’s 50th anniversary in 2026, we’re launching a limited-edition HG Carbon Tune-up Part in a brand-new color scheme! 92449 HG Carbon Wide Rear Stay (3mm/Silver) Waigo Hobby marks Tamiya’s first use of silver carbon fiber stay paired with purple lettering, making it truly one-of-a-kind among tune-up parts! The 3mm silver carbon fiber parts are a rare specification that hasn’t been released in over a decade! This gives this limited edition product not only practical value but also added commemorative significance. The 3mm thickness offers greater rigidity compared to the standard 1.5mm carbon fiber plates on the market. It can replace modifications involving layered 1.5mm sheets, and the one-piece 3mm design provides enhanced strength and impact resistance. Additionally, the 3mm carbon fiber stay opens up new possibilities for parts selection in Stock Class competitions.
Tamiya 95573 1/32 Mini 4WD Shooting Pround Star Clear Blue Special (MA Chassis)
This is the first special edition of the Tamiya Shooting Proud Star (Item 18641). It is a car which graced the Japanese Mini 4WD comic “Hyper Dash! Yonkuro” in CoroCoro Aniki and was inspired by the Dash-3 Shooting Star. The model is based upon the midship motor, aerodynamically honed MA chassis.
BEYBLADE X
GEAR SPORTS
TAMIYA 95665 1/32 FULLY COWLED 30TH ANNIV. RED SLICK TIRES & GOLD COLOR PLATED WHEELS
TAMIYA 92455 1/32 MINI 4WD MACH FRAME FIGHTING KOREA EDITION VER.2 (FM-A/FINISHED MODEL)
TAMIYA 95187 1/32 MINI 4WD HG CARBON REAR MULTI ROLLER SETTING STAY (1.5MM) J-CUP 2026
TAMIYA 18087 1/32 MINI 4WD HAWK RACER (SUPER II CHASSIS)
TAMIYA 18103 1/32 MINI 4WD CROSS SPEAR 01 (VZ)
TAMIYA 95466 1/32 MINI 4WD JR MANTA RAY MK.II BLACK SPECIAL MS CHASSIS KIT
The Cool Racer
This plastic assembly kit of the Mini 4WD PRO Manta Ray Mk.II will no doubt bring you the joy of racing! The Manta Ray Mk.II Black Special features semi-transparent smoke ABS resin body shell and the exclusive black and blue color scheme markings. The centrally located double shaft motor effectively transmits power to all four wheels for optimum performance and the "One-Touch" three piece chassis requires no glue and is a breeze to assemble. In addition to the bright blue colored chassis, the Manta Ray Mk.II has fiber-glass reinforced ABS resin N-02 and T-01 units improving chassis rigidity, as well as blue narrow tires on large diameter black wheels which provide stylish racing looks to this special model.
Tamiya Customised MS Floating Gear Double Shaft 3.7 (15429)
Newly deisnged high precision engineered MS Floating Gear - 3.7:1 Ratio
Double layered AO520 bearing for extra smoothness of the gear
Bearing is held by the inner metal ring made by 15345 (11mm ball bearing roller)
520 Bearings can be replaced easily after wear and tear
Paired with precised engineered shaft for both front and rear gear usage.
Tamiya 86031 PS-31 SMOKE
TAMIYA 15475 1/32 MINI 4WD 13MM ROLLER BALL BEARING
TAMIYA 95674 1/32 MINI 4WD FULLY COWLED 30TH ANNIV. HG CARBON FRONT STAY (1.5MM/SILVER)
★This 1.5mm stay can be fitted to your Fully Cowled Mini 4WD Series car without the need for any modifications!
★It commemorates thirty years of the Series, and features a rather special silver color carbon fiber pattern plus wording printed in blue.
★Sporting refined lines, it has holes for the attachment of 9mm, 13mm and 19mm rollers to ensure there are setup options aplenty.
★The stay can also be attached to the underside of your car to lessen the likelihood of getting stuck on the course fence.
TAMIYA 95666 1/32 MINI 4WD FULLY COWLED 30TH ANNIV. SUPER HARD LOW PROFILE TIRES & MATTE GREEN PLATED WHEELS
Tamiya 95110 1/32 Mini 4WD Dash-1 Emperor Memorial (MS Chassis) 30 Years of The Japan Cup
• The MS chassis is molded in Black (main chassis) and Red (N-02 and T-01 Units) ABS.
• White 6-spoke wheels are paired with super hard Black low-profile tires featuring sidewall lettering (JAPAN CUP 30 YEARS SINCE 1988).
• Features dedicated metallic stickers to decorate the body including a commemorative “30 years” sticker design.
• Type 130 motor included. The model features a 4:1 gear ratio.
• Two AA batteries are required (sold separately).