POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
TAMIYA 92457 1/32 MINI 4WD HG CARBON REAR BRAKE STAY (1.5MM) TAMIYA KOREA 30TH ANNIVERSARY
Parts that help improve the performance and settings of the machine.
This is a lightweight and strong carbon rear brake stay with a special logo printed in red to commemorate the 30th anniversary of Tamiya Korea. It is an indispensable part on courses with ups and downs, and the area where the brake sponge is attached is large, so it can reduce interference with the rollers. The carbon pattern and the 30th anniversary logo greatly enhance the racing atmosphere, drawing attention during the race. There are also many holes for installing mass dampers, etc. 2mm screws and aluminum spacers for installation are also provided.
Tamiya 95667 Mini 4WD Fully Cowled Mini 4WD 30th Anniversary Multi-Tape (15mm width, Black/Pink)
Tamiya 15163 Mini 4WD Parts Case
Tamiya 85025 TS-25 PINK
SkyRC NC1500 AA/AAA Battery Charger/Analyzer
Charging batteries is usually a primitive, boring and mundane activity, and it still is. What matters during the charging process, especially for AA/AAA NiMH battery charging? No doubt, accuracy and safety!
The creation of NC1500 not only arises out of the need but also from the desire to have a simple but safe and accurate charger for the battery.
NC1500 has four independent slots and supports AA/AAA NiMH batteries, offers a maximum charge rate of 1500mA.
BEYBLADE X
GEAR SPORTS
Tamiya 19433 1/32 Mini 4WD Tridagger X Premium (Super-II Chassis)
Tamiya 1/32 19803 Lord Knight (VZ)
Tamiya 95155 HG Carbon Rear Brake Stay (1.5mm) J-Cup 2022
MINI 4WD 2.0mm HOLLOW PROPELLER SHAFT (FOR TYPE 5/SUPER FMシャーシ CHASSIS)
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA 95699 1/32 MINI4WD K4TASCHE VIVID SPECIAL (PINK/GREEN) (FM-A CHASSIS)
This assembly kit creates a Vivid Special version of the K4Tasche, a Mini 4WD racer with a retro pickup truck body molded in transparent light gray and featuring rounded headlights and a rear bed; you can even fit a Mini 4WD figure into the driver’s seat. The FM-A chassis offers superb stability, and comes in fluorescent pink with fluorescent green A parts. Stickers are included to decorate the car.
BEYBLADE X UX-11 IMPACT DRAKE 9-60LR STARTER
TAMIYA 15492 1/32 MINI 4WD BRAKE SPONGE SET (1/2/3mm WHITE) by
TAMIYA 92451 1/32 MINI 4WD MACH FRAME FIGHTING KOREA EDITION VER.2 (FM-A)
The second version of Maha Frame Fighting Korea Edition is here!
The 'Mach Frame Fighting Korea Edition', which received much love at the time of its release, has returned with a new look. While maintaining the same components as the previous model, a new ABS clear body has been adopted, and the matching sticker color scheme and material change have been completed. You can feel a different charm from the previous model through the clear body with the new sticker attached and the assembly completed. The FM-A chassis, which features a stable posture when jumping with a front motor layout, has been adopted as is, and the white color A part and blue color chassis configuration are the same. The Dish type carbon reinforced wheels are equipped with low-friction maroon tires that do not bounce well when landing and provide fast cornering performance. The sticker design, completed in three colors of red, blue, and black reminiscent of the Taegeukgi with a shape resembling a calligrapher's strong strokes, well expresses the Fighting Korea Edition that is both splendid and contains strong spirit.
Tamiya 95588 1/32 Dog Kuroshiba Special (VS Chassis)
The popular mini 4WD dog is now available in a special kit as Kuroshiba. The body adopts the first yellow color Mach buret, and the driver figure of Kuroshiba to put on the driver’s seat is already assembled and painted. A cute marking sticker is also included. The pastel blue color chassis is a small and lightweight VS with a short wheelbase. A large diameter low-height tire with white print is attached to the large diameter 6-spoke wheel of fluorescent orange. It is a kit that can be easily assembled by fitting and screwing without using adhesive.
TAMIYA 18704 1/32 MINI 4WD SHADOW SHARK (AR CHASSIS)
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. The air intakes on the chassis and body are integrated for optimal performance. This high-speed racing chassis also features low-friction plastic bearings to ensure that any loss of power from the engine to the wheels is minimal in nature. The under-panel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features a 4.2:1 gear ratio.
Beyblade X CX-04 Battle Entry Set
WHAT'S IN THE BOX :
DranBrave S6-60V (Special Ver.)
- Lock Chip: Dran
- Main Blade: Brave
- Assist Blade: Slash
- Ratchet: 6-60
- Bit: Vortex
PerseusDark B6-80W (Special Ver.)
- Lock Chip: Perseus
- Main Blade: Dark
- Assist Blade: Bumper
- Ratchet: 6-80
- Bit: Wedge
Winder Launcher (Black×Magenta Ver.)
Winder Launcher (White×Blue Ver.)
Xtreme Stadium
ABOUT CX-01 CX-01 Starter DranBrave S6-60V
- Manufacturer: Takara Tomy
- Product Code: CX-04 / CX04
- System: Xtreme Gear Sports
- Series: Beyblade X
- ASIN:4904810939634