POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
Tamiya 95155 HG Carbon Rear Brake Stay (1.5mm) J-Cup 2022
Original price was: $22.00.$18.00Current price is: $18.00.
TAMIYA 18628 1/32 MINI 4WD DASH 2 BURNING SUN (MS Chassis)
Original price was: $20.00.$16.00Current price is: $16.00.
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
Tamiya 95605 Mini 4WD Car Catcher (Clear Green)
• Mini 4WD Car Catcher x1
• Made from durable clear green 0.75mm thickness polypropylene (PP).
• Small flaps in the catcher help slow the car and prevent tires locking up.
• Features Mini 4WD logo pad printed in black.
• Approximate assembled dimensions (external): 110mm x 190mm x 70mm.
• Can be used with all Mini 4WD and Mini 4WD PRO cars.
TAMIYA 95680 1/32 MINI 4WD HG ALUMINUM WHEELS for SMALL DIA. NARROW TIRES (24mm) (REVERSIBLE, 2PCS.)
These high quality aluminum wheels are for use with small-diameter (24mm) tires: heavier than plastic wheels, they contribute to a lower center of gravity and enhanced stability. They can be fitted to only one end of the car to fine-tune its balance, or even reversed to allow use with Super X and Super XX chassis cars.
★Four bushings are also included.
Tamiya 95483 1/32 Mini 4WD Mach-Bullet Metallic Special (AR Chassis)
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, cooling the batteries and motor and extending their effectiveness. The air intakes on the chassis and body are integrated for optimal performance. The underpanel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features a 5:1 gear ratio.
Tamiya 63764 Official Mini 4WD Beginner’s Tuning Guide 2023
The handy-sized mini 4WD guidebook, which was sold out due to its popularity, has been renewed!
“Introduction to Mini 4WD Cho-soku Tune-up” packed with the fun of mini 4WD tuning is the latest version and reappears. “How to install upgrade parts and what effect they have” is posted along with many photos such as sample modification examples, and explains the fun of remodeling Mini 4WD. It is a book that can be used as the latest catalog of mini 4WD kits and upgrade parts. In addition, since many modified machines of champions of Tamiya official competitions are introduced, it is also useful as a reference when making modified machines. Handy size suitable for carrying to the race venue. A simple vehicle inspection gauge that is convenient for machine checks is also included.
TAMIYA 95687 1/32 MINI 4WD HYPER DASH PRO ASIA CHALLENGE
This limited-edition release of the double-shaft Hyper-Dash Motor PRO (Item 15375) has a label and packaging commemorating the Tamiya Mini 4WD Asia Challenge (TMAC). It is a balanced, high-performance motor for advanced Mini 4WD PRO racers. It is at home on a range of courses, from twisting and turning technical ones to straight-dominated speed layouts.
BEYBLADE X
GEAR SPORTS
TAMIYA 95259 1/32 MINI 4WD HG CARBON REAR STAY (3MM)
Original price was: $24.00.$16.00Current price is: $16.00.
Beyblade X BX-27 Sphinx Cowl Select Random Booster Vol 3
Original price was: $14.95.$13.45Current price is: $13.45.
TAMIYA 17007 1/32 MINI 4WD NISSAN KING CAB JR.
Original price was: $26.00.$22.00Current price is: $22.00.
Tamiya 95120 1/32 Mini 4WD Baron Biento Japan Cup 2019 (FM-A Chassis)
The FM-A chassis is a front motor unit with advanced aerodynamic themes that - thanks to its center of gravity toward the front - is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with low-friction front skid bar and roller (4 included) parts, while rear rollers are 8mm thick for superb stability. The chassis underside allows easy access to the motor and quick setup changes. Includes 3.5:1 gears and a motor.
• Mini 4WD model assembly kit. Length: 156mm, width: 97mm
• The FM-A chassis is molded in Black ABS.
• Body comes molded in Black ABS.
• Dedicated commemorative stickers include a Japan Cup 2019 logo.
• Red dish wheels are paired with super hard tires featuring pad printed White sidewalls.
• Type 130 motor included. The model features a 3.5:1 gear ratio.
TAMIYA 15452 1/32 MINI 4WD FRP WIDE REAR PLATE (for AR CHASSIS)
TAMIYA 18637 1/32 MINI 4WD FESTA JAUNE (MA CHASSIS)
Tamiya 95140 1/32 Low Friction Small Dia. Low Profile Tire (Maroon, 2pcs.) Japan Cup 2020
TAMIYA 92430 1/32 MINI 4WD AVANTE MK.III AZURE TAMIYA PLAMODEL FACTORY HONG KONG SPECIAL
To thank the supporters for the past 45 years. Waigo Hobby has decided to launch a 45th anniversary limited edition car kit.
It will be named as "AVANTE Mk3 TAMIYA PLAMODEL FACTORY HONG KONG SPECIAL" (Item: 92430).
It comes with a Carbon Polycarbonate Cowl with Black MS Chassis. To top it off, it has custom designed decals and tires to match the car. Specially for this kit, a transparent tire has been used to show the wordings "TAMIYA PLAMODEL FACTORY" words on the wheels itself!
This is definitely a car for the collectors!
Pre-Order likely to reach Singapore in 1st week of October.
TAMIYA 92460 1/32 MINI 4WD COPPERFANG TKC 30TH ANNIVERSARY SPECIAL (FM-A CHASSIS)
A special Copper Fang to celebrate Tamiya Korea's 30th anniversary in 2026!
To celebrate Tamiya Korea's 30th anniversary in 2026, we have prepared a special Copper Fang.
The body of the Copper Fang, which features the FM-A chassis with a front motor layout for a stable posture when jumping, is made up of a clear blue, white A-parts, and a light blue chassis. In addition, the white A-spoke wheels are paired with light blue hard-type tires that do not bounce as much when landing and have less cornering deceleration than the tires that come standard with other kits. In honor of the passion and achievements of 30 years, the sticker designed with the concept of shining wings makes the blue and white colored machine stand out even more. Also included is a Rev-Tune 2 motor with a 30th anniversary sticker attached exclusively for this kit.
TAMIYA 15386 1/32 MINI 4WD STABILIZER BALL CAP (BRIGHT)
