POPULAR CATEGORIES

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

TAMIYA MINI4WD

Let's Get Back On Track!

1.

Free Delivery.

Free - $150 and above

2.

Order As a Gift.

Surprise your loved ones.

3.

High Quality.

100% Authentic premium quality toys.

4.

Compete.

Engage in friendly competition.

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

$280.00

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

Sold out

Tamiya Mini 4WD 95634 Low Friction Small Dia. Narrow Tires (24mm) & 3-Spoke Wheels

$15.00

★This set includes white 3-spoke wheels and maroon low-friction tires.
★Thanks to their hard compound, these low grip-tires minimize bounce after airtime and also facilitate quicker cornering.
★Employ all four, or experiment with using them on the front or rear, left or right only to fine-tune your setup.

Sold out

Tamiya 18644 1/32 Mini 4WD God Burning Sun (MA Chassis)

$20.00

Specifications
‚òÖLength: 156mm ‚òÖWidth: 97mm ‚òÖHeight: 45mm ‚òÖIncludes double-shaft motor ‚òÖEasy snap-together assembly

Separately Required Items
‚òÖR6/AA/UM3 batteries (x2)

Tomica PREMIUM 12 Morris Mini (1st) (298328)

Original price was: $14.95.Current price is: $11.95.
  • Number 12 (1st)
  • Premium line
  • Perfect to start a collection!
Sold out

Tamiya 95138 HG Aluminum Setting Board Brown J-Cup 2020

$31.00

• Dimensions: 190mm x 112mm x 2mm thickness

• Brown anodized aluminum surface features laser-inscribed Japan Cup 2020 logo and scales for car length and width, as well as tire width and diameter.

-13% Sold out

TAMIYA 92455 1/32 MINI 4WD MACH FRAME FIGHTING KOREA EDITION VER.2 (FM-A/FINISHED MODEL)

Original price was: $48.00.Current price is: $42.00.

This is a Finished Model Version.

The second version of MachFrame Fighting Korea Edition is here!

The 'Mach Frame Fighting Korea Edition', which received much love at the time of its release, has returned with a new look. While maintaining the same components as the previous model, a new ABS clear body has been adopted, and the matching sticker color scheme and material change have been completed. You can feel a different charm from the previous model through the clear body with the new sticker attached and the assembly completed. The FM-A chassis, which features a stable posture when jumping with a front motor layout, has been adopted as is, and the white color A part and blue color chassis configuration are the same. The Dish type carbon reinforced wheels are equipped with low-friction maroon tires that do not bounce well when landing and provide fast cornering performance. The sticker design, completed in three colors of red, blue, and black reminiscent of the Taegeukgi with a shape resembling a calligrapher's strong strokes, well expresses the Fighting Korea Edition that is both splendid and contains strong spirit.

Sold out

Tamiya 15189 O-Ring Set for 17/19mm Rollers (Blue)

$15.00

This item is a set of optional parts for Mini 4WD car models.   Can be used for rollers with

TAMIYA 95786 1/32 MINI 4WD PORTABLE PIT PURPLE (ASIA CHALLENGE 2026)

Original price was: $55.00.Current price is: $45.00.

To commemorate the Tamiya Mini 4WD Asia Challenge 2026 (TMAC), this limited-edition Mini 4WD Portable Pit includes two commemorative stickers!

The carrying case is designed specifically with Mini 4WD users in mind and can be used to hold everything including tools, batteries, parts, and the machines themselves. It is a convenient item for keeping all your Mini 4WD items in one place.

Sold out

TAMIYA 95396 1/32 MINI 4WD 19MM ALUMINUM ROLLERS (5 SPOKES) W/PLASTIC RINGS (RED)

$18.00
  • Lightweight and tough race-spec rollers featuring built-in ball bearings for super smooth rotation.
  • These 19mm-diameter components feature a stylish 5-spoke design, with plastic rings in red giving a tasteful splash of color.

OUR BLOG