POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
Tamiya 92429 Thunder Shot Mk.II WAIGO HOBBY 45th Anniversary Special
TAMIYA 15526 1/32 MINI 4WD BASIC TUNE-UP PARTS SET for VZ CHASSIS
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
Tamiya 18652 1/32 Mini 4WD Toyota Gazoo Racing TS050 Hybrid (MA Chassis)
3PV Transmitter – 3(+1)-Channel Digital Proportional RC System
TRANSMITTER SPECS
T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 3+1* CHANNELS
*The 4th channel is used for mixing functions only.
COMMUNICATION METHOD:
Two-way (T-FHSS)/One-way(S-FHSS, FHSS) operation system.
MAXIMUM OPERATING RANGE:
80m (Optimum condition)
FOR SAFETY:
F/S, ID
TRANSMITTER FREQUENCY:
2.4 GHz band
POWER REQUIREMENT:
Size AA Dry Cell battery x 4 (6 V)
CURRENT DRAIN:
100 mA or less
TRANSMISSION ANTENNA:
1/2λ di-pole (Built-in)
RECEIVER SPECS
R304SB
T-FHSS
SIZE:
35.1 mm x 23.2 mm x 8.5 mm
WEIGHT:
6.6 g
OPERATING VOLTAGE:
DC 4.8V-7.4V
R203GF
S-FHSS/FHSS (Auto Detection)
SIZE:
39 mm x 26 mm x 10 mm
1.54 in x 1.02 in x 0.39 in
WEIGHT:
8 g
0.28 oz
OPERATING VOLTAGE:
DC 4.8V-7.4V
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 15549 1/32 MINI 4WD HG CARBON WIDE REAR PLATE 2MM (SLIDING DAMPER)
BEYBLADE X
GEAR SPORTS
Tamiya 17013 1/32 JR Wild Mini 4WD Mammoth Dump Truck Jr. Kit
Tamiya 18705 1/32 Mini 4WD Flame Astute (AR Chassis)
Tamiya 95481 1/32 Mini 4WD Aluminum Spacer Set (12/6.7/6/3/1.5mm, 2pcs. each) (Black)
Tamiya 95308 1/32 Mini 4WD The Bigwig RS (Super II Chassis)
• Mini 4WD model assembly kit.
• The Super-II Chassis is molded in Black and Light Gun Metal color ABS resin.
• The body is molded in Royal Blue PS.
• Features newly-designed metallic stickers.
• Comes with matte plated 6-spoke large-diameter wheels, and black slick tires.
• Type 130 motor is included. The model features a 4.2:1 gear ratio.
TAMIYA 15435 1/32 MINI 4WD BASIC TUNE-UP SET
Tamiya 95514 Mini 4WD HG Maintenance Base (180x210mm)
Tamiya 95569 Mini 4WD Elephant Racer (VZ Chassis)
• Mini 4WD model assembly kit.
• Classic car-inspired body is molded in a smooth shade of light green.
• Features a pre-assembled and painted Elephant Racer figure.
• The VZ chassis is molded in white ABS plastic, with gold color ABS A parts and white low-friction plastic bearings.
• Copper color plated fin spoke wheels are paired with hard tires molded in yellow.
• Dedicated stickers are included in the kit to decorate the body.
• Type 130 motor is included. The model features a 5:1 gear ratio.
Tamiya 95476 1/32 Mini 4WD FM-A Fluorescent-Color Chassis Set (Green)
TAMIYA 95379 1/32 MINI 4WD LIGHTWEIGHT DOUBLE ALUMINUM ROLLERS (13-12MM)
These rollers for MINI 4WD race cars provide smooth and stable cornering, with the smaller top roller supporting the car when it leans through a corner section.
• Lightweight Double Aluminum Rollers x2
• About 20% lighter than standard equivalents (Item 15398)
• 520 ball bearings, spacers, screws and nuts are included.
• Compatible with Mini 4WD and Mini 4WD PRO cars.
Tamiya 15340 1/32 Mini 4WD Motor Cooling Shield
This is an aluminum motor heat sink that can be attached to the Dangun Racer EVO series with one touch and improves the heat dissipation effect of the motor. It increases the area that the motor comes into contact with the air, effectively dissipating heat, not only preventing the power loss of the motor due to heat, but also extending the life of the motor.