POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X UX-21 – Hell’s Nether Deck Set
[PRE ORDER EARLY MAY] TAMIYA 95708 1/32 MINI 4WD SMALL DIAMETER, LOW-FRICTION TIRES AND CARBON Y-SPOKE WHEELS – ASIA CHALLENGE 2026
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
TAMIYA 15550 1/32 MINI 4WD HG CARBON BRAKE STAY 1.5MM
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
TAMIYA MINI4WD AVANTE MK.III CUSTOMISED HOLOGRPAHIC STICKER
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
Mr McKenic Contact Cleaner and Lubricant
A cleaning solvent, Contact Cleaner & Lubricant removes dust, dirt, and deposits etc. from electrical and electronic contact points while lubricating the mechanism. It displaces moisture and helps to prevent short-circuits. At the same time, it leaves a protective film that prevents contact points from oxidation.
TAMIYA 95679 1/32 MINI 4WD NEW YEAR’S EDITION “YEAR OF THE SNAKE 2025”
TAMIYA 18655 1/32 MINI 4WD TOYOTA GR SUPRA (MA CHASSIS)
TAMIYA AO-94774 MINI 4WD WHEEL BUSHINGS BLACK
BEYBLADE X
GEAR SPORTS
BEYBLADE X UX-14 SCORPIOSPEAR 0-70Z STARTER
Tomica Transporter Honda Civic Type R (FD2) (912606)
Tamiya 18718 Mini 4WD K4 Gambol (FM-A Chassis)
TAMIYA 15518 1/32 MINI 4WD FRP REAR BRAKE STAY SET (WHITE)
TAMIYA 17007 1/32 MINI 4WD NISSAN KING CAB JR.
Tamiya 95315 1/32 Mini 4WD 19Mm Alum Ball-Race Rollers Hg Lw (Ringless/Blue)
Rollers on Mini 4WD vehicles are an optional upgrade part for any Mini 4WD race car. Tamiya Mini 4WD kits come standard with plastic rollers that usually measure 13mm or smaller. By adding larger 19mm rollers your vehicle will have a wider stance, thereby maintaining greater speed around high speed turns, while bouncing less off the walled circuit.
These lightweight aluminum roller parts have a weight reduction of around 30% over standard aluminum rollers thanks to their shape and holes, allowing speedy performance! Inbuilt 520 size bearings provide smooth movement. These rollers can be used in the front or rear of any Mini 4WD machine.
Tamiya 15358 Low-Profile Tire & Wheel Set (Fin)
TAMIYA 19446 1/32 MINI 4WD GREAT BLASTSONIC (AR CHASSIS)
This is a brand-new 4WD machine, which is to appear in a modern update of the ???Let???s & Go!!" Mini 4WD comic in Japan. ??As keen Mini 4WD fans may catch from its name, the Great Blastsonic ??? driven by hero Retsu Seiba ??? takes some design cues from previous Sonic successors. It is based on the AR Chassis, which is designed to offer its driver durability, customizability and ease of maintenance.
Tamiya 92428 Mini 4WD Avante MK3 TKC 25th Anniv. Special Ver.2
Tamiya 19444 1/32 Mini 4WD Beat-Magnum Premium (AR Chassis)
This is a Premium release in the Fully Cowled Mini 4WD series of the Beat-Magnum (original Item: 19421). This car was driven by hero Go Seiba in the popular Mini 4WD cartoon series "Let"s & Go!!". It utilizes the AR Chassis, which places great emphasis upon aerodynamics, also offering users a blend of durability, customization and ease of maintenance.
Tamiya 95308 1/32 Mini 4WD The Bigwig RS (Super II Chassis)
• Mini 4WD model assembly kit.
• The Super-II Chassis is molded in Black and Light Gun Metal color ABS resin.
• The body is molded in Royal Blue PS.
• Features newly-designed metallic stickers.
• Comes with matte plated 6-spoke large-diameter wheels, and black slick tires.
• Type 130 motor is included. The model features a 4.2:1 gear ratio.
TAMIYA 18639 1/32 MINI 4WD ABILISTA (MA CHASSIS)
Looks Like a Winner!
The Abilista is the fifth model to appear on the midship motor layout MA Chassis. Just one glance at the alluring super sports car-inspired body will be enough to convince you that this is a must-have model, with the stylish long nose short-deck form accentuated by sumptuous curves. Bulging front and rear fenders accentuate the slimline center of the car nicely, while an eye-catching wing not only gives a sporty look, it also has air outlets that combine with the front intake to boost the model's aerodynamics. The color scheme is an understated yet effective white with blue tones and gold trim, with metallic stickers included to recreate headlights, windows and taillights. The model rolls on white dish-type wheels with low-profile tires.
Tamiya 95121 HG Carbon Multi Roller Setting Stay (1.5mm) J-Cup 2019
• 1.5mm-thick Carbon Fiber Stay x1
• Rigid carbon fiber is lighter than FRP equivalent (Item 15394).
• New shape and removal of elongated holes enhances durability.
• Features stylish carbon fiber surface pattern, and J-Cup/Tamiya print in Gold.
• Attachment holes are included for 9mm, 13mm and 19mm rollers, enabling plenty of setup options!