POPULAR CATEGORIES

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

-5% Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

Original price was: $295.00.Current price is: $280.00.

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

1.

Free Delivery.

Free - $150 and above

2.

Order As a Gift.

Surprise your loved ones.

3.

High Quality.

100% Authentic premium quality toys.

4.

Compete.

Engage in friendly competition.

SKYRC S65 AC BALANCE CHARGER / DISCHARGER

Original price was: $86.00.Current price is: $71.00.
  • Technical Specifications
    • AC Input: 100V – 240V
    • Charge Power / Current: Max 65W, 0.1A – 6.0A
    • Discharge Power / Current: Max 10W, 0.1A – 2.0A
    • Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
    • Nickel Cell Count: NiMH, NiCd (6S – 8S)
    • Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
    • Dimensions & Weight: 117 x 105 x 55 mm, 315g

SKYRC e450 CHARGER

Original price was: $49.00.Current price is: $41.00.
  • LIPO/LIHV/LIFE (2-4S)
  • NIMH (6-8S)
  • Local Warranty
  • What’s in the Box
    e450 Charger
    AC Power Cord
    XT60 Charging Cable
    Instruction Manual

Sold out

TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)

$999.00

Specifications

★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

-5% Sold out

TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.

Original price was: $295.00.Current price is: $280.00.

Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.

Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR

Original price was: $7.00.Current price is: $6.00.

★This motor offers balanced power, roughly on a level between the Atomic Tuned and Hyper Dash 2 motors. ★It is

TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO

Original price was: $7.00.Current price is: $6.00.

★This Mini 4WD PRO motor offers superb output at high RPMs and is ideal for use on high-speed circuits. ★Designed

TAMIYA 95677 1/32 MINI 4WD JAPAN CUP JUNIOR CIRCUIT SPECIAL COLOR EDITION (YELLOW)

Original price was: $450.00.Current price is: $398.00.

Specifications
• Assembled Course Dimensions: 306cm×144cm.
• Course Length: 3 laps = approximately 20m
• Curved sections are molded in yellow ABS plastic.
• Straight, wave, under bridge, over bridge and bridge approach sections are molded in black ABS plastic.

Sold out

Tamiya 15507 HG Low Rebound Sponge Tires (for Large Dia. Narrow Wheels)

$12.00

Black 10mm width Low Rebound Sponge Tire x4

 

for Mini 4WD and Mini 4WD PRO cars using large-diameter, narrow tires.

 

Sold out

Tamiya 95570 Mini 4wd Penguin Racer (VZ Chassis)

$28.00

• Mini 4WD model assembly kit. Length: 158mm, width: 98mm, height: 45mm.
• Low-friction (POM 620) plastic bearings give smooth rotation.
• The Penguin Racer figure comes pre-assembled and painted.
• Dedicated stickers are included to decorate the model.
• Gold color plated 6-spoke wheels are paired with large diameter hard low-profile tires molded in white.
• Type 130 motor is included. The model features a 5:1 gear ratio.

Sold out

Tamiya 94941 Stainless Steel Screw Set

$8.00

Set includes each length (15mm, 30mm) in 3 colors x2, for a total of 12 screws.

-26% Sold out

TAMIYA 92451 1/32 MINI 4WD MACH FRAME FIGHTING KOREA EDITION VER.2 (FM-A)

Original price was: $38.00.Current price is: $28.00.

The second version of Maha Frame Fighting Korea Edition is here!

The 'Mach Frame Fighting Korea Edition', which received much love at the time of its release, has returned with a new look. While maintaining the same components as the previous model, a new ABS clear body has been adopted, and the matching sticker color scheme and material change have been completed. You can feel a different charm from the previous model through the clear body with the new sticker attached and the assembly completed. The FM-A chassis, which features a stable posture when jumping with a front motor layout, has been adopted as is, and the white color A part and blue color chassis configuration are the same. The Dish type carbon reinforced wheels are equipped with low-friction maroon tires that do not bounce well when landing and provide fast cornering performance. The sticker design, completed in three colors of red, blue, and black reminiscent of the Taegeukgi with a shape resembling a calligrapher's strong strokes, well expresses the Fighting Korea Edition that is both splendid and contains strong spirit.

Sold out

Tamiya 95538 1/32 Mini 4WD HG Aluminum Large Dia. Narrow Wheels II (2pcs.)

$16.00

• HG Aluminum Large Dia. Narrow Wheels II x2
• Bushings x8
• Wheels have a flanged outer edge to keep their tire firmly in place.
• Wheel bushings are molded in PP (was PE) for more secure attachment.
• Each wheel weighs approximately 3.9 grams.

-20% Sold out

TAMIYA 18650 1/32 MINI 4WD DCR-02 (MA CHASSIS)

Original price was: $20.00.Current price is: $16.00.

Deeply Cool Racer
This assembly kit creates a thrilling Mini 4WD racer called the DCR-02. Its stylish yellow ABS body is the work of Takayuki Yamazaki, who also designed the DCR-01, the first model in the DCR series. The DCR-02 body is comprised of three separate components - front cowl, rear cowl and rear wing - which can be mixed and matched with other DCR-02 bodies, and the front and rear cowls can also be used with DCR-01 components! Metallic stickers are included in the kit to decorate the body. The MA chassis is molded in gun metal color, with yellow A parts , plus Y-spoke wheels and stylish low-profile tires.

OUR BLOG