POPULAR CATEGORIES
FEATURED
BEYBLADE X BX-50 – HEAVEN’S RING VOL.11 (FULL SET)
WHAT'S INCLUDED:
6x Beyblade X Random Booster Vol.10 Beyblade.
NOTES:
Your package will contain one of each of the following Beys:
BX-50 01: HeavensRing 0-80DS
BX-50 02: HeavensRing 6-60TP
BX-50 03: ImpactDrake 7-55FB
BX-50 04: GhostCircle M-85DS
BX-50 05: WolfFlame D9-65L
BX-50 06: CerberusReaper B0-80WB
Brand New With Asia QR Code.
BEYBLADE X CX-12 BOOSTER PHOENIX FLARE Z9-80WW
What’s Included
- Blade: Flare
- Assist Blade: Z
- Ratchet: 9-80
- Bit: Wall Wedge
This is a Booster set; Launcher not included.
Product Information
- Product Type: Beyblade Booster
- Bey Type: Defense
- Series: Beyblade X
- System:
- Bey Weight Range:
- Bey Weight:
- Spin Direction: Right
- Primary Color: Red
- Attributes:
- Packaging: NIP
- Alias:
- ASIN: 4904810096153
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
TAMIYA MINI4WD
Let's Get Back On Track!
SKYRC NC3000 OCTA AA/AAA NIMH/NICD BATTERY CHARGER/ANALYZER
Original price was: $168.00.$145.00Current price is: $145.00.
SKYRC S65 AC BALANCE CHARGER / DISCHARGER
-
Technical Specifications
- AC Input: 100V – 240V
- Charge Power / Current: Max 65W, 0.1A – 6.0A
- Discharge Power / Current: Max 10W, 0.1A – 2.0A
- Lithium Cell Count: LiPo, LiFe, LiIon, LiHV (2S – 4S)
- Nickel Cell Count: NiMH, NiCd (6S – 8S)
- Lead (Pb) Cells: 3S – 6S (6V – 12V), including AGM and Cold modes
- Dimensions & Weight: 117 x 105 x 55 mm, 315g
SKYRC e450 CHARGER
TAMIYA 58751 1/10 SCALE R/C BMW M4 GT3 EVO (TT-02 CHASSIS)
Specifications
★Length: 443mm, width: 188mm, height: 132mm ★Wheelbase: 257mm ★Tire width/diameter: 26/66mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
TAMIYA 58755 1/12 SCALE R/C LUNCH BOX EVO.
Specifications
●Length: 394mm, width: 297mm, height: 222mm. ●Wheelbase: 217mm ●Weight: 1,660g (without R/C equipment) ●Tread: 228mm (front & rear) ●ABS plastic box frame ●Rear-wheel drive ●3-bevel gear differential ●2-piece steering tie-rod ●Front double wishbone suspension ●Rear 3-link rigid ●CVA oil dampers ●14.7:1 gear ratio ●Tire width/diameter: 71/115mm ●Type 540 motor ●Full ball bearings ●ESC included for export.
Separately Required Items
●2-channel R/C system w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger
TAMIYA 15455 1/32 MINI 4WD LIGHT-DASH MOTOR
TAMIYA 15433 1/32 MINI 4WD MACH-DASH MOTOR PRO
SALE PRODUCTS
Tamiya Mini 4WD 95634 Low Friction Small Dia. Narrow Tires (24mm) & 3-Spoke Wheels
★This set includes white 3-spoke wheels and maroon low-friction tires.
★Thanks to their hard compound, these low grip-tires minimize bounce after airtime and also facilitate quicker cornering.
★Employ all four, or experiment with using them on the front or rear, left or right only to fine-tune your setup.
Tamiya 63764 Official Mini 4WD Beginner’s Tuning Guide 2023
The handy-sized mini 4WD guidebook, which was sold out due to its popularity, has been renewed!
“Introduction to Mini 4WD Cho-soku Tune-up” packed with the fun of mini 4WD tuning is the latest version and reappears. “How to install upgrade parts and what effect they have” is posted along with many photos such as sample modification examples, and explains the fun of remodeling Mini 4WD. It is a book that can be used as the latest catalog of mini 4WD kits and upgrade parts. In addition, since many modified machines of champions of Tamiya official competitions are introduced, it is also useful as a reference when making modified machines. Handy size suitable for carrying to the race venue. A simple vehicle inspection gauge that is convenient for machine checks is also included.
BEYBLADE X
GEAR SPORTS
Tamiya 94577 8T Plastic Pinion Gear Set (10pcs.)
Original price was: $3.00.$2.50Current price is: $2.50.
BEYBLADE X – UX-15 SHARKSCALE DECK SET
Tamiya 95514 Mini 4WD HG Maintenance Base (180x210mm)
TAMIYA 15529 1/32 MINI 4WD LOW FRICTION PLASTIC DOUBLE ROLLERS (BLACK/13-13mm)
★ These simple dual rollers are 13mm top and bottom, and recommended for use on the rear of the car. They support the car if it leans, rolling on the lane wall.
★ They are molded in low-friction material, and can be used in conjunction with separately sold 520 ball bearings, or bearing roller spacers, for a further performance boost.
★ Small parts plus a wrench for attachment included.
Compatible Cars
MA, VZ & AR Chassis cars
Tamiya 95055 Stainless Steal Screw Set
TAMIYA 95706 1/32 MINI 4WD GEO GLIDER ASIA CHALLENGE 2026 SPECIAL (FM-A CHASSIS)
The Geo Glider Asia Challenge 2026 Special (FM-A) Limited Mini 4WD Kit from Tamiya celebrates the 2026 Asia Cup in the Philippines with a special edition release. Based on the popular GEO Glider design, this kit features exclusive colored body and chassis parts to commemorate the event. Its futuristic styling and race-ready FM-A chassis make it ideal for both collectors and Mini 4WD enthusiasts. This limited-edition model combines Tamiya’s precision engineering with a celebratory design theme.
Tamiya 92423 HG Carbon Rear Stay (3mm) Waigo Hobby
★This 3mm thickness carbon rear stay allows attachment of 13mm or 19mm rollers in a wide setup.
★Its shape is based upon that of the carbon rear stay, with small tweaks.
★The carbon fiber surface pattern will give your car a racier look, as will the blue-green print including roller sizes, Tamiya and Waigo Hobby logos, and more!
